Original new DLE DLE65 model aircraft model gasoline engine 65CC engine For RC helicopter/fixed wing hobby
Idle Speed: 1400 rpm/min.
16Kg Static Thrust / 100 meters Altitude
13.7Kg Static Thrust / 1800 meters Altitude
The specification of the aircraft propeller:23×10;24×8;24×9;24×10;
the type of the sparking plug :NGK CM6
Exhaust Amount :
diameter × stroke :
Ratio of compression:
Ratio of lubricating capacity :
Weight: Main engine:
Age Recommendation:RC engine is not a toy! Not for children under 14 years.
The engine is designed for use on a model radio control airplane. If it is used for any purpose, we cannot be responsible for its reliability of safety. ·Keep away from the rotating propeller area while operating the engine. ·Do not wear loose clothing near the engine or the propeller. ·Do not operate the engine near loose material such as dirt, gravel, ropes, sand, etc. ·Always run your model engine in a well-ventilated area. Model engines produce possibly harmful carbon monoxide fumes. ·Always ensure that the propeller is securely attached to the engine shaft and all retaining fasteners are tightened properly before each flight. ·Always stand clear of and behind the propeller, ensure the face and body are far away from the propeller blade after trajectory. Never allow anyone, to be in front of or to the sides of the propeller when starting or running the engine. ·Always ensure that small parts in the children can't touch place to prevent children from swallowing parts; ·Always check the propeller nut tightening. ·Gasoline is extremely flammable. Be careful of any sparks from electrical contacts such as fuel pumps, battery charger, etc. ·Allow your engine stop and cool before touching or fueling. The running engine of the surface temperature is high, easy to cause burns and other personal injury. ·Be sure to check whether there are loose bolts before flying. When install a muffler, the muffler in the threads of the screw into the engine exhaust, until twist fixed, it is recommended to use screw glue. ·Ensure the engine and muffler in aircraft fairing environment with cold air, make sure the engine cooling.
Carburetor initial setup: High speed needle:Completely closed before exiting 1.2 turns; Low speed needle:According the "View 1" Idling start time the air inlet: According the "View 2"
Install the CDI ignition spark plug cap The hexagon of spark plug and plug cap need align and then push down the spark plug cap and clockwise rotation it.
Starting the engine:
1. According the engine connection method, install the engine on RC airplane. Made the carburetor initial setup and connect the electronic ignition, put the fuel into the oil tank, connect the power and radio control equipment. 2. Will power off the electronic igniter at this time, make the carburetor inlet port in a fully closed position. Through the motor starter rapidly rotating propeller engine make the fuel in the tank inhalation of carburetor, please pay attention to the suction of fuel should not be too much, otherwise will drown the spark plug, the engine start difficult. 3. Please open the carburetor throttle air inlet in "View 2" position, power on the electronic igniter, then start the engine using the motor starter, the engine will begin to work, the fans will adjust the carburetor according to your own need: Firstly please adjust the high-speed, the high-speed oil needle will along the clockwise from the oil-rich state to the inferior state transition, make the engine work in the stable state of high speed (please note: do not let the engine run boundary for a long time, this is a big damage for engine). Secondly adjust the idle speed, to control the air inlet between 2.8mm to 3.2mm which showed in "View 2" (about a third), adjust the idle speed oil needle along the clockwise or counterclockwise direction, make the engine work in the stable state of idle speed (12 * 6 proposed APC propeller idle speed 2500 RPM). Note: The small gasoline engine running at idling, the carburetor intake oil injection is a normal phenomenon. Fuel pump: it is composed of pump and regulator, which have the effect of pumping oil and regulating flow, and responsible for engine fuel supply; It has two sides, the side which has one screw fixed the cover plate is pump; the other side is regulator which has four screw.
100% Secure paymentwith SSL Encryption. If you're not100% satisfied, let us know and we'll make it right.Shopping safety guaranteed
We use PAYPAL to collect payment. For details, you can check the official website of PAYPAL to guarantee your shopping funds.
We cooperate with DHL, UPS,FedEx, EMS, shipping companies, you can choose freely when placing orders;
Shipping Fee：UPS/FedEx,EMS(system selects the fastest mode of transportation delivery；Transport is required in some areas, and the logistics information can only be viewed on the official website after 3-4 days of shipping order number;)
Express Shipping Fee：System uses DHL transportation, 5-8 days to receive the goods;
Shipping costs vary depending on the shipping destination and the number of items that you purchase. You can get a calculation of your exact shipping charges by adding items to your cart, proceeding to checkout, and entering your mailing address. The shipping cost will automatically update and display in your total costs.
WHERE DO WE DELIVER?
We provide worldwide shipping.
HOW LONG WILL IT TAKE FOR THE BUYER TO RECEIVE THEIR ORDER?
On average, merchandise is produced and shipped from our facility 1-3 business days after purchase. Standard shipping/transit times apply (5-10 days for domestic and 7-15 days for international).
CAN THE ORDER BE DELIVERED TO MULTIPLE ADDRESSES?
We do not offer the shipment to multiple addresses for a single order. If you would like items delivered to multiple addresses, please place those orders separately.
DO YOU OFFER DELIVERY TO PO BOXES OR MILITARY APO/FPO ADDRESSES?
Yes, we can send shipments to PO Boxes and Military APO/FPO addresses.
WILL I BE CHARGED VAT TAXES?
Items shipping internationally from the US are shipped DDU (Delivered Duty Unpaid) and we do not collect VAT (Value Added Taxes). All taxes, duties, and customs fees are the responsibility of the recipient of the package.
Depending on the receiving country, your package may incur local customs or VAT charges. We recommend contacting your local customs office for more information regarding your country's customs policies.