Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
Drone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-LiftDrone Power Kit | Hobbywing X8 Rotor Drone Power System for Heavy-Lift
1 15

hobbywing

Hobbywing X8 Rotor Drone Power Kit

$218.00

Last 90 Days Sales: PCS

HWX8-KCW
TYPE: X8 Kit (40mm Pipe Diameter) CW

Erwartete Lieferung innerhalb von 7~15DAYS Tagen nach Zahlungseingang;

Secure Checkout & Bank Transfer

American Express
Diners Club
Google Pay
JCB
Maestro
Mastercard
PayPal
Union Pay
Visa
Generic

Customers who can not place an order please contact us;

Tag : Agricultural Drone Components , Drone , Drone Power Kit , High Thrust Drone Kit , Hobbywing X , Hobbywing X8 , Lightweight Drone Power , Lightweight Drone Power Solution , Ready-to-Use Drone , Ready-to-Use Drone Power , Waterproof Drone , Waterproof Drone Power Supply , Waterproof Drone Power System
TYPE: X8 Kit (40mm Pipe Diameter) CW

Core Overview

The X8 is a highly integrated, ready-to-use all-in-one power system designed for lightweight, efficient agricultural drones. The kit innovatively integrates the motor, ESC, propeller adapter, and motor mount in advance and comes standard with 30-inch carbon composite folding propellers, achieving "ready to use" and greatly simplifying the installation process. Optimized for medium loads of 5-7kg/axis, the maximum single-axis thrust reaches 15kg. The product features IPX6 ultra-strong protection and patented drainage design, allowing direct water rinsing, fearless of harsh field environments. It is an ideal choice for lightweight agricultural operations that pursue rapid deployment, high reliability, and easy maintenance.

Core Technology Advantages

🧩

Integrated Design, Ready to Use

Pre-Integrated: The motor, ESC, propeller adapter, and motor mount are pre-assembled and debugged as an integrated unit before leaving the factory. Users do not need complex wiring and matching, making installation extremely convenient.

Quick Adaptation: Supports two carbon tube diameters: 35/40mm (40mm requires a separate adapter), offering flexible compatibility.

🛡️

Ultra-Strong Protection, Fearless of Harsh Environments

IPX6 Protection Level: Overall protection level reaches IPX6, with structural design featuring liquid and debris drainage channels.

Patent Rinsing Design: Can be directly rinsed with clean water after operation, easily handling common harsh agricultural conditions like rain, pesticides, salt spray, and dust.

Optimized Power and Intelligent Interaction

Efficient FOC Algorithm: Based on FOC (Field-Oriented Control) PMSM optimization algorithm, perfectly matching the ESC, motor, and propeller for low noise, high control accuracy, and high efficiency.

High-Brightness LED Status Light: Integrated with LED lights that can be set to a color or turned off, not only providing illumination but also indicating system working status, issuing warnings in case of abnormalities, enhancing safety.

Supports Firmware Upgrade: The power system firmware can be upgraded by connecting to a computer via the separately purchased Hobbywing DataLinkBox, continuously synchronizing the latest optimized product features.

🔧

Robust Reliability and Convenient Maintenance

Modular Design: Uses high-strength aluminum alloy and reinforced structure, with ultra-strong impact resistance. In case of damage, customers can quickly replace the entire integrated unit, a single or a pair of propellers, or the propeller adapter, greatly shortening field maintenance time.

Intelligent Data and Protection: The ESC features multiple intelligent protections such as power-on self-test, overcurrent, and stall protection, and can output full system operating data (throttle, RPM, voltage, current, temperature, etc.) to the flight controller or DataLinkBox in real-time for monitoring and diagnosis.

Usage Recommendations

  • Accurate Load Matching: This kit is optimized for a single-axis load of 5-7kg (aircraft total load calculated based on the number of axes). Please strictly control the takeoff weight within this range to achieve the claimed high efficiency of 9.5-8.6 g/W and optimal endurance.
  • Utilize Integration Advantages: Make full use of its "ready-to-use" feature to quickly complete aircraft assembly. In the field, have spare integrated units, propellers, and other modular spare parts ready to achieve minute-level quick replacement, maximizing uptime.
  • Proactive Cleaning and Upgrades: After operation, use its washable feature to clean promptly with clean water, extending lifespan. Follow official updates and perform firmware upgrades via DataLinkBox to obtain continuous performance optimizations.
  • Monitor Status Indicators: Before and after flight, observe the high-brightness LED lights on the motor. Any abnormal flashing pattern is an important warning signal from the system; inspect promptly.
  • Advanced Data Loop Application: For teams pursuing refined management, it is recommended to configure the Hobbywing DataLinkBox, enabling real-time collection and closed-loop control of 8-channel power data, deeply optimizing flight strategy and energy efficiency.

Product Parameters

Basic Specifications

Category Parameter Item Detailed Specification
Basic Parameters Product Name X8
Maximum Thrust 15kg
Single Axis Recommended Thrust 5-7kg
Recommended Thrust Efficiency 9.5-8.6 g/W
Voltage Range 18-54V
Rated Voltage 12S-46V
Compatible Battery 12S (LiPo)
Compatible Carbon Tube Diameter 35mm / 40mm (40mm requires adapter)
Power System Weight (with wires, propeller) 1150g
Operating Environment Temperature -20 ~ 50 ℃
Dust/Water Protection Level IPX6
Rated Input Power 950W
Rated Output Power 810W
ESC Product Model XRotor 80A-FOC
Communication Method UART
Maximum Allowable Current (30s) 80A
Continuous Current 20A
Throttle Calibration Not Supported
Dual Throttle Not Supported
PWM Pulse Width 1100-1940μs
BEC None
Motor Product Model 8120-100KV
Stator/Pole Count 36N40P
Motor Outer Diameter Φ88.6mm
Propeller Product Model MFP 30x11 (30-inch folding propeller)
Total Weight 191±5g
Main Material Carbon Composite (Carbon Fiber Reinforced Nylon Composite Material)

Test Data Table

Operating Voltage: 46V / 12S LiPo, Propeller: MFP 30x11

Test Condition Statement: The above data was measured by Hobbywing laboratory at room temperature 25℃, sea level altitude, by varying throttle input.

Throttle (%) Thrust (g) Current (A) Input Power (W) RPM Efficiency (g/W) Torque (N·m) Output Power (W)
33% 1,629 2.7 123.6 1,332 13.2 0.61 85.2
37% 2,009 3.4 156.2 1,469 12.9 0.74 113.7
39% 2,468 4.3 200.0 1,623 12.3 0.90 152.3
42% 2,982 5.5 254.0 1,780 11.7 1.07 200.2
48% 3,535 6.9 317.5 1,935 11.1 1.27 256.7
51% 4,467 9.5 435.7 2,168 10.3 1.59 361.7
54% 5,008 11.1 510.3 2,291 9.8 1.78 427.6
57% 5,480 12.6 578.5 2,392 9.5 1.95 487.9
60% 5,973 14.2 653.1 2,493 9.1 2.12 553.4
63% 6,490 16.0 734.7 2,593 8.8 2.30 625.0
66% 7,032 17.9 824.3 2,695 8.5 2.49 703.2
69% 7,957 21.4 986.2 2,895 8.1 2.82 843.9
72% 8,447 23.4 1,076.6 2,943 7.8 2.99 922.1
75% 9,473 27.7 1,277.1 3,111 7.4 3.36 1,094.9
78% 10,007 30.1 1,387.0 3,195 7.2 3.55 1,189.3
81% 10,958 34.6 1,592.7 3,339 6.9 3.90 1,364.9
84% 12,042 40.0 1,840.4 3,494 6.5 4.30 1,574.2
87% 12,436 42.0 1,933.4 3,548 6.4 4.45 1,652.1
90% 13,522 47.7 2,195.1 3,688 6.2 4.84 1,868.0
100% 14,715 54.0 2,485.2 3,828 5.9 5.24 2,100.3

Frequently Asked Questions (FAQ)

Q: How much time can the "integrated power system, ready to use" specifically save for me?

A: Traditional split power systems require users to assemble the motor, ESC, and motor mount themselves, and perform wiring, insulation, and debugging, a process that may take over 30 minutes and is error-prone. The X8 is factory-integrated, debugged, and tested. You only need to fix it on the arm carbon tube and connect the power and signal wires, reducing installation time to within 5 minutes and completely avoiding wiring error risks.

Q: The promotion says "can be directly rinsed with clean water." Can I really rinse it directly like washing a car?

A: Yes, but pay attention to the method. With IPX6 protection and patented drainage channel design, you can use low-pressure water flow to rinse the power system surface to remove pesticides, mud, and other dirt. However, it is forbidden to use high-pressure water guns for close-range direct spraying, especially at connector areas. After rinsing, it is recommended to air-dry or blow-dry before storage.

Q: What abnormalities can the LED light indicate?

A: The high-brightness LED light can be constantly on or flash in a set color during normal system operation. When faults such as stall, overcurrent, overheating, signal loss, etc., occur, it switches to specific rapid flashing or color change patterns, allowing the pilot to visually detect abnormalities from a distance and take timely measures to ensure safety.

Q: Is the DataLinkBox a must-buy? What is it used for?

A: For basic flight, it is not essential. But for professional users, it is highly recommended. Its core functions are two: 1) Advanced Diagnosis: Can read detailed real-time operating data and historical fault records for precise troubleshooting; 2) System Upgrade: The only way to upgrade the power system firmware, obtaining the latest performance optimizations and feature improvements released by the manufacturer.

Q: My aircraft's carbon tube is 40mm. What should I do?

A: You need to purchase a "tube diameter adapter" separately. The X8 standard configuration is compatible with 35mm carbon tubes. By installing a dedicated adapter kit, it can be securely mounted on 40mm carbon tubes, expanding aircraft compatibility. Please confirm the adapter accessory with the seller when purchasing.

X8 D35mm CAD
X8 D40mm CAD

HÄUFIG GESTELLTE FRAGEN

1. WIE BESTELLE ICH?

Wählen Sie einfach Ihren Stil auf der Produktseite aus und klicken Sie dann auf die Schaltfläche „In den Warenkorb“ und folgen Sie den einfachen Schritten, um Ihre Bestellung abzuschließen.

Wir bereiten Ihre Bestellung vor und informieren Sie, wenn sie auf dem Weg ist!

2. WIE LANGE WIRD ES DAUERN, MEINE BESTELLUNG ZU VERSENDEN?

Bestellungen werden in der Regel innerhalb von 5 bis 10 Werktagen versendet. Bei internationalen Bestellungen dauert der Versand zusätzlich 1 bis 2 Wochen.

3. MEINE SENDUNGSNUMMER FUNKTIONIERT NICHT

Sendungsverfolgungsnummern können 3-5 Tage benötigen, um im System des Versanddienstleisters zu erscheinen. Gelegentlich kann der Versanddienstleister eine Bestellung verlieren. Wenn die Sendungsverfolgungsnummer nach ein paar Tagen immer noch nicht funktioniert, kontaktieren Sie bitte den Versanddienstleister.

4. ICH BENÖTIGE HILFE BEI EINER SPÄTEN BESTELLUNG

Bestellungen werden in der Regel innerhalb von 5 bis 8 Werktagen versendet. Bei internationalen Bestellungen dauert der Versand zusätzlich 1 bis 2 Wochen.

Wenn Ihre Bestellung nach 10 Werktagen (inland) und 20 Werktagen (international) nicht angekommen ist, kontaktieren Sie bitte unser Team, wir helfen Ihnen gerne weiter.

Produkte, die angepasst werden müssen, Produktionszeit beträgt 10-25 Tage bis zum Versand, Produktdetails werden bekannt gegeben.

5. WELCHE ART VON ZAHLUNGEN AKZEPTIEREN SIE?

Wir akzeptieren Visa, Mastercard sowie Paypal.

6. WANN WIRD MEINE KARTE BELASTET?

Gerade nachdem Ihre Bestellung erfolgreich aufgegeben wurde.

7. WIE SICHER SIND MEINE PERSONENBEZOGENEN DATEN?

Wir halten uns an die höchsten Branchenstandards, um Ihre persönlichen Informationen beim Checkout und Kauf zu schützen.

Ihre Kreditkarteninformationen werden während der Übertragung mit der Secure Socket Layer (SSL)-Technologie verschlüsselt, die im Internet weit verbreitet ist, um Zahlungen zu verarbeiten. Ihre Kreditkarteninformationen werden nur verwendet, um die angeforderte Transaktion abzuschließen, und werden anschließend nicht gespeichert.

7.Einkaufsicherheit garantiert

Wir verwenden PAYPAL, um Zahlungen zu sammeln. Für Details können Sie die offizielle Website von PAYPAL besuchen, um Ihre Einkaufsgelder zu garantieren.

https://www.paypal.com/webapps...

8.Welche Lieferung?

Wir arbeiten mit den Versandunternehmen DHL, FedEx und EMS zusammen, Sie können bei der Bestellung frei wählen;

DHL : https://www.dhl.com/

FedEx :https://www.fedex.com/

EMS:https://www.ems.com.cn/

Logistikverfolgung:https://www.uavmodel.com/apps/17TRACK 

9.Rückerstattungsproblem?

Aufgrund eigener Gründe des Käufers, die zu einer Rückerstattung führen. Diese Website übernimmt keine Verantwortung für die Zahlung von Bearbeitungsgebühren. Versandkosten werden für zurückgegebene Produkte nicht berechnet.

Wenn Sie mit Kreditkarte bezahlen, könnte Ihre Zahlung an der Kasse von unserem System als Schutz gegen möglichen Kreditkartenbetrug abgelehnt werden. Es ist eine gute Idee, Ihre Kreditkartenfirma oder Bank im Voraus anzurufen, um sie über den Kauf zu informieren, damit er nicht abgelehnt wird.
Unter solchen Umständen sind hier 3 Lösungen für Sie:
1. Wenn Sie ein PayPal-Konto haben, versuchen Sie bitte, mit PayPal zu bezahlen.
2. Bitte wechseln Sie zu Ihren anderen Kredit-/Debitkarten.
3. Wenn Sie kein PayPal-Konto haben, wählen Sie bitte trotzdem PayPal auf der Checkout-Seite aus und klicken Sie auf die Schaltfläche Bestellung abschließen. Dann werden Sie zu einer Seite weitergeleitet, die sowohl den Zugang zu PayPal als auch zu Debit-/Kreditkartenzahlungen bietet (für die letztere Option müssen Sie sich nicht bei PayPal registrieren).
Wie folgt:


Schritt 1. Wählen Sie PayPal (auch wenn Sie kein PayPal-Konto haben)


Schritt 2. Klicken Sie auf "Mit Debit- oder Kreditkarte bezahlen".


Schritt 3. Füllen Sie Ihre Kreditkarteninformationen aus und schließen Sie Ihre Bestellung ab.

Banküberweisungsinformationen:

Kontonummer: 63001185921
Inhabername: Xiamen Gaoteng Trading Co., Ltd.
Unterstützte Währungen: AUD CAD CHF DKK EUR GBP HKD JPY NOK NZD SEK SGD USD ZAR
Bankname: JPMorgan Chase Bank N.A. Hong Kong Filiale
Bankstandort Land: HONGKONG, CHINA
Bankadresse: CHATER HOUSE, 8 CONNAUGHT ROAD, CENTRAL, HONGKONG
Kontotyp: Girokonto
Swift/BIC: CHASHKHH (CHASHKHHXXX, falls 11 Zeichen erforderlich sind)
Routing-Nummer: 007863
Bankleitzahl: 007
Filialnummer: 863
Bitte fügen Sie die folgende Notiz/Nachricht an den Empfänger bei der Zahlung hinzu: [Käufername][Rechnungs-/Vertragsnummer][Produkt]

Eigentum:UAVMODEL CO., LIMITED;ZHANGZHOU YICHENG TECHNOLOGY CO., LTD.;XIAMEN GAOTENG TECHNOLOGY CO., LTD.

E-Mail:Sales@uavmodel.com

Telefon: +8613015671328

UAVMODEL

Eigentum: UAVMODEL CO., LIMITED; ZHANGZHOU YICHENG TECHNOLOGY CO., LTD.;XIAMEN GAOTENG TECHNOLOGY CO., LTD.

Email:Sales@uavmodel.com

313, Nr. 25, Jingxia Straße, Wenpu Industriepark, Jiaomei Stadt, Taiwan Investitionszone,

Einheit 2502-3, Nr. 1110, Jimei Nordstraße, Softwarepark, Torch High-Tech-Zone, Xiamen

 

Was wir wirklich tun?

UAVMODEL ist ein führender Hersteller von UAV-Rumpf. Unsere UAV-Plattformen sind darauf ausgelegt, die professionellen Bedürfnisse verschiedener Branchen zu erfüllen, wie z.B. industrielle Inspektion, Gas und Öl, Präzisionslandwirtschaft, Kartierung, öffentliche Sicherheit, Bauwesen, Forstwirtschaft und Verteidigungsbehörden.

10+ Jahre an Erfahrung

500+ Erfolgreiche Fälle

12+ Branchenpreise

 

Unsere Vision

Unser Unternehmen engagiert sich für die Forschung und Entwicklung von mittelgroßen und großen UAVs sowie von UAV-Technologien für spezielle Zwecke, die sich an komplexe Anwendungsumgebungen anpassen. Es ist hauptsächlich in der Forschung und Entwicklung, dem Design, der Produktion, der Herstellung, dem Test, dem Verkauf und dem Service von UAVs und deren luftgestützter Missionsausrüstung tätig und bietet den Nutzern basierend auf eigener Technologie Systemlösungen an. Unser aktuelles Geschäftsmodell umfasst den Verkauf von Komplettmaschinen und Zubehör, diversifizierte Anwendungsdienste und die fortgeschrittene UAV-Technologie-Voruntersuchung.

Kooperieren Sie mit uns!

Professioneller und freundlicher hilfsbereiter Kundenservice.
Kostenloser oder günstiger oder angemessener Versand. PayPal, Kreditkarte und Banküberweisung Zahlungsmöglichkeiten. uavmodel ist akzeptabel.
Schneller und zuverlässiger Schutzversand mit Produktdeklaration

Support 24/7

24/7 Live-Technikexpertise und Unterstützung
Sprechen Sie mit unseren Ingenieuren für Antworten und Ratschläge
Kundenportal für Supportanfragen und Kontoverwaltung

 

Kostenloser Versand

Einige Länder über 100 $

Kostenlose Rücksendungen

Keine Fragen gestellt

Vertrauensbewertung 4.9

Mehr als 1000

130-1567-1328

sales@uavmodel.com