UAVMODEL

SKYRC PC1080NEO Dual-Channel Charger for RC Models

$262.70

Last 90 Days Sales: PCS

903325072623

결제 후 7~15일일 이내 배송 예정;

Secure Checkout & Bank Transfer

American Express
Diners Club
Google Pay
JCB
Maestro
Mastercard
PayPal
Union Pay
Visa
Generic

주문이 불가능한 고객님께서는 저희에게 연락해 주시기 바랍니다;

Tag : 6S Battery Charger , Aircraft Battery Charger , Dual-Channel Charger

SKYRC PC1080neo Dual‑Channel Industrial LiPo Battery Charger

Dual‑Channel Independent

540W per channel, charge 2 batteries at once


Charge Up to 12 Batteries

With G630neo charging hub


20A High Current

1080W total power for fast charging


Multiple Protections

Over‑current, over‑voltage, over‑temp, reverse polarity

PC1080neo is an industrial‑grade dual‑channel LiPo battery charger from SKYRC, backed by 16 years of technical expertise and widely used in agriculture, forestry, public safety, surveying, and other drone applications. The new upgrade delivers 1080W total output (540W±10% per channel), up to 20A charge current and 1800mA balance current, with an energy conversion efficiency of 90%. Equipped with active PFC technology, it supports 100V–240V wide‑range AC input for global compatibility. The 2.8‑inch color display and three operating modes (Fast, Balance, Storage) support LiPo and LiHV (4.25V–4.50V adjustable) 6S batteries. Built‑in multiple safety protections and optional G630neo charging hub enable automatic sequential charging for up to 12 batteries, meeting high‑capacity, intensive field charging demands.

Dual‑channel independent output With G630neo hub – charge 12 batteries 20A max charge current Comprehensive protection system

Dual‑Channel Independent Output: PC1080neo supports two independent channels, charging two batteries simultaneously. Each channel delivers up to 20A and 540W, with a total power of 1080W, easily handling complex scenarios.

Charge 12 Batteries with G630neo Hub: Paired with the G630neo charging hub, each channel expands to 6 ports, supporting up to 12 LiPo batteries in total. The hub intelligently detects remaining capacity and charges from highest to lowest, automatically switching after each battery is full – no manual supervision required.

Multiple Protection System: Built‑in protections against short circuit, reverse polarity, over‑temperature, over‑capacity, over‑time, under‑voltage, and over‑voltage, plus a fire‑retardant casing, ensure safe and reliable charging.

Vivid Display, Intuitive Control: A 2.8‑inch 320×240 color LCD with a 65° tilt angle offers clear, comfortable viewing. Select a mode, press start, and your charging session begins – simple and efficient, with full control at your fingertips.

Active PFC – Stable & Efficient: Active power factor correction automatically adjusts to AC input voltage, improving stability and reducing grid interference. The wide‑range input (100–240V) and 90% conversion efficiency deliver both performance and energy savings.

Robust Cooling & Portability: A carefully designed air intake combines industrial aesthetics with efficient heat dissipation. The carbon‑blade fan provides strong airflow and stable performance. A built‑in carrying handle makes it easy to transport for multi‑site operations.

Product Specifications
Product Name PC1080neo Dual‑Channel LiPo Battery Charger
Number of Channels 2
AC Input Voltage 100V~240V (wide range, active PFC)
Total Charging Power 1080W (540W±10% per channel)
Charge Current 0.1~20.0A (per channel)
Balance Current 200mA~1800mA (per channel)
Storage Discharge Power 30W×2 channels
Supported Battery Types LiPo / LiHV (6S)
LiPo Cut‑off Voltage 4.15~4.25V/CELL (default 4.20V)
LiHV Cut‑off Voltage 4.25~4.50V/CELL (default 4.35V)
Storage Target Voltage LiPo/LiHV 3.90V±0.05V/CELL
Display 2.8" 320×240 color LCD (65° tilt)
Operating Modes Fast Charge, Balance Charge, Storage
Charging Hub Support Yes (G630neo, expands to 6 ports per channel, up to 12 batteries)
Dimensions (L×W×H) 255×124.6×120mm
Weight 2.43kg
Safety Protections Short circuit, reverse polarity, over‑temp, over‑capacity, over‑time, under‑voltage, over‑voltage; fire‑retardant casing
Frequently Asked Questions
Q1: How can I improve charging efficiency for large drone battery fleets?
Pair PC1080neo with the G630neo charging hub. Each channel expands to 6 ports, supporting up to 12 LiPo batteries in total. The hub intelligently scans each battery’s remaining capacity and charges from highest to lowest, automatically switching after each is full – perfect for agricultural, surveying, or any operation requiring rapid battery turnover.
Q2: Can the charger handle unstable grid voltage or generator power in the field?
Yes. Active PFC automatically corrects AC input fluctuations, supports 100‑240V wide range, and achieves 90% conversion efficiency while reducing harmonic interference. It performs reliably even with voltage swings or portable generators.
Q3: How does the charger handle both LiPo and LiHV drone batteries?
PC1080neo is compatible with both LiPo and LiHV. You can freely adjust the cut‑off voltage (LiPo 4.15–4.25V, LiHV 4.25–4.50V) in the settings. Always verify your battery supports the selected voltage to avoid over‑charging. The Storage mode automatically charges/discharges to 3.90V/CELL, prolonging battery life and preventing swelling or capacity loss from long‑term storage.
Q4: How can service technicians quickly assess battery health during maintenance?
The display shows real‑time per‑cell voltage, current, capacity (mAh), and percentage. In Balance mode, accuracy reaches ±10mV/Cell, making it easy to spot cell voltage discrepancies. If a cell shows abnormal voltage or prolonged balancing, it can be flagged for replacement, reducing flight risks.
Q5: Which languages does the charger support? Is it easy for overseas users?
SKYRC products serve over 100 countries. The charger includes multiple languages covering major language families. Users can switch language in the settings, ensuring a consistent and user‑friendly experience for international customers.
Q6: Can I charge different battery chemistries or cell counts on the two channels?
The two channels are independent, each with its own control interface. In theory, you can connect different battery types or cell counts, but we recommend double‑checking parameters for each battery. The charger is primarily optimised for 6S LiPo/LiHV packs.
Q7: The screen doesn’t light up or the charger won’t start – what should I do?
Follow these steps:
1. Ensure the power cord is properly connected and the wall outlet has power.
2. Check that the rear power switch is set to “ON”.
3. Confirm AC input is within 100‑240V.
4. In field operations, extension reels may cause voltage drop – inspect the socket for poor contact or excessive load.
Q8: What do the error messages mean?
If an error appears, disconnect the battery, check all connections, and retry. Common errors include over‑voltage, reverse polarity, low cell voltage, high cell voltage, output short, capacity limit reached, or safety timer expiry. Refer to the manual for detailed codes.
Q9: The charger isn’t charging – is it broken?
Not necessarily. Common reversible causes include:
1. Poor contact (oxidised pins, dirt, loose plugs).
2. Battery protection triggered (over‑discharge, over‑temperature).
3. Ambient temperature outside safe range (below 5°C or above 40°C).
4. Insufficient power supply capacity.
Check these first before assuming a hardware failure.
Q10: How well does PC1080neo dissipate heat in hot field environments?
The charger features an optimised air intake design and a carbon‑blade fan for strong airflow and stable performance. However, in summer field conditions, place the charger in a shaded, well‑ventilated area, avoid direct sunlight, and regularly clean the intake/exhaust grilles.
Q11: Where should I place the charger and batteries during charging?
Always place the charger and batteries on a fire‑proof, non‑conductive surface. Never charge on car seats or other flammable materials. Avoid rain, moisture, or wet conditions.
Q12: What is the warranty policy for PC1080neo?
SKYRC offers a one‑year warranty from the date of purchase covering manufacturer defects. It does not cover misuse, abuse, or operation beyond specified limits.
What's in the Box
PC1080neo Dual‑Channel Charger ×1 AC Power Cord ×1 Charging / Balance Cables (6S LiPo/LiHV) ×2 sets Multi‑language User Manual ×1
Note: G630neo charging hub is an optional accessory and sold separately.
You May Also Like
SKYRC G1220 Parallel Charging Board
Parallel Charging

SKYRC G1220 Parallel Charging Board

Designed for parallel charging multiple LiPo batteries simultaneously, greatly improving throughput. Compatible with SKYRC series chargers.
Parallel charging Multi‑battery support
View Details

자주 묻는 질문(FAQ)

1. 주문은 어떻게 하나요?

  • 제품 페이지에서 원하는 스타일을 선택한 후 “장바구니에 담기(Add To Cart)” 버튼을 클릭하고, 안내에 따라 간단한 단계를 거쳐 주문을 완료하세요.
  • 주문이 준비되면 배송 시작 시 알려드립니다!

2. 주문한 상품은 언제 배송되나요?

  • 주문은 일반적으로 영업일 기준 5~10일 이내에 발송됩니다. 해외 배송의 경우 운송에 1~2주가 추가로 소요됩니다.

3. 운송장 번호가 조회되지 않습니다

  • 운송장 번호가 배송 업체의 시스템에 반영되기까지 3~5일이 소요될 수 있습니다. 간혹 배송 업체 측에서 주문 건을 누락하는 경우가 있습니다. 며칠이 지나도 운송장 번호가 조회되지 않으면 배송 업체에 문의해 주시기 바랍니다.

4. 배송이 지연되어 도움이 필요합니다

  • 주문은 일반적으로 영업일 기준 5~8일 이내에 발송됩니다. 해외 배송의 경우 운송에 1~2주가 추가로 소요됩니다.
  • 영업일 기준 10일(국내) 및 20일(해외)이 지나도 주문하신 상품이 도착하지 않으면 저희 팀에 문의해 주세요. 기꺼이 도와드리겠습니다.
  • 맞춤 제작이 필요한 제품의 경우 제작 기간은 10~25일이며, 제품 상세 페이지에 공지됩니다.

5. 다음과 같은 안전한 결제 수단을 지원합니다:

신용카드 (Airwallex 이용):

  • Visa / Mastercard / American Express
  • 보안 제공: Airwallex, 글로벌 규정 준수 결제 플랫폼

타사 결제:

  • PayPal (개인 및 비즈니스 계정)

은행 송금:

  • 법인 계좌 송금 (SWIFT/IBAN 지원)

6. 결제는 언제 이루어지나요?

주문이 성공적으로 완료된 직후 결제됩니다.

7. 개인 정보는 얼마나 안전하게 보호되나요?

  • 저희는 결제 및 구매 시 고객님의 개인 정보를 보호하기 위해 업계 최고 수준의 표준을 준수합니다.
  • 신용카드 정보는 인터넷 결제 처리에 널리 사용되는 SSL(Secure Socket Layer) 기술을 사용하여 전송 중에 암호화됩니다. 신용카드 정보는 요청된 거래를 완료하는 데에만 사용되며 이후 저장되지 않습니다.

7. 쇼핑 안전 보장

결제 수집을 위해 PAYPAL을 사용합니다. 자세한 내용은 PAYPAL 공식 웹사이트에서 쇼핑 자금 보호 정책을 확인하실 수 있습니다.

https://www.paypal.com/webapps...

8. 배송은 어떻게 이루어지나요?

DHL, FedEx, EMS 배송 업체와 협력하고 있으며, 주문 시 자유롭게 선택하실 수 있습니다.

9. 환불 관련 문제

구매자의 개인적인 사유로 인한 환불 시, 반품 배송비를 포함한 처리 비용은 본 웹사이트에서 책임지지 않습니다. 

주문 제작 상품: 고객이 주문을 제출하면 즉시 제작에 들어갑니다. 맞춤 제작의 특성과 즉각적인 제작 착수로 인해, 확인 후 주문은 구속력을 가지며 환불이 불가합니다.

제작 기간이 필요한 모든 제품은 맞춤 제작 상품으로 분류됩니다.

상세 내용 문의

10. 답변: 통관 책임은 무역 조건(예: EXW, FOB, DDP)에 따라 다릅니다. 일반적으로:

  • 기본 조건: 고객(수취인)이 통관을 처리하고 모든 관세 및 세금을 납부해야 합니다.
  • 예외: 주문서에 "DDP(관세 지급 인도 조건)"라고 명시된 경우, 저희가 통관을 처리합니다.

11. 답변: 일반적으로 필요한 서류:

  • 신분증(예: 여권) 또는 사업자 등록 번호;
  • 상업 송장(구매 후 문의 요망);
  • : 사전에 현지 세관에 문의하세요!

12. 답변: 관세는 제품 유형, 가치 및 규정에 따라 해당 국가의 세관에서 결정합니다. 예상 비용 확인 방법:

  • 현지 세관 웹사이트 확인;
  • 타사 도구 사용(예: Avalara, DutyCalculator).

13. 답변:

  • 지연: 세관에 직접 연락하여 서류를 제출하거나 비용을 납부하세요. 운송장 번호나 송장이 필요하시면 제공해 드립니다.
  • 폐기: 통관에 응하지 않아 발생하는 손실은 고객이 부담합니다.
  • 예외: 당사의 서류 오류로 인한 경우, 지원을 위해 문의해 주세요.

14. 답변: 상업 송장과 패킹 리스트는 이메일로 발송됩니다. 기타 서류가 필요하시면 sales@uavmodel.com으로 문의해 주세요(24시간 이내 응답).

15. 답변: 다음 제품은 압수되거나 반송될 수 있습니다:

  • 해당 국가에서 금지된 품목(예: 금지 성분이 포함된 화장품);
  • 필수 인증이 없는 제품(예: CE 마크가 없는 전자제품);
  • 가치가 낮게 신고된 경우(탈세 의심을 받을 수 있음).

신용카드로 결제하실 경우, 신용카드 부정 사용 방지를 위한 당사 시스템에 의해 결제가 거부될 수 있습니다. 결제 전 카드사나 은행에 미리 연락하여 구매 사실을 알리시면 결제 거부를 방지하는 데 도움이 됩니다.
결제가 거부될 경우, 다음과 같은 3가지 해결 방법을 권장해 드립니다:
1. PayPal 계정이 있으신 경우, PayPal로 결제를 시도해 주세요.
2. 다른 신용카드나 체크카드로 변경하여 결제해 주세요.
3. PayPal 계정이 없으시더라도 결제 페이지에서 PayPal을 선택하고 '주문 완료(Complete order)' 버튼을 클릭하세요. 이후 PayPal 결제 및 신용/체크카드 결제가 가능한 페이지로 이동하게 됩니다(후자의 경우 PayPal에 가입하실 필요가 없습니다).
진행 단계는 다음과 같습니다:


1단계. PayPal을 선택하세요(PayPal 계정이 없어도 가능합니다).


2단계. "Pay with Debit or Credit Card(직불 또는 신용카드로 결제)"를 클릭하세요.


3단계. 신용카드 정보를 입력하고 주문을 완료하세요.

은행 송금 정보:

계좌 번호: 63001185921
예금주: Xiamen Gaoteng Trading Co., Ltd.
지원 통화: AUD CAD CHF DKK EUR GBP HKD JPY NOK NZD SEK SGD USD ZAR
은행명: JPMorgan Chase Bank N.A. Hong Kong Branch
은행 소재 국가: HONG KONG, CHINA
은행 주소: CHATER HOUSE, 8 CONNAUGHT ROAD, CENTRAL, HONG KONG
계좌 유형: 당좌 예금(Current)
Swift/BIC: CHASHKHH (11자리가 필요한 경우 CHASHKHHXXX)
Routing Number: 007863
은행 코드: 007
지점 번호: 863
결제 시 수취인에게 전달할 메모/메시지에 다음 내용을 포함해 주세요: [구매자 성함][송장/계약 번호][상품명]

UAVMODEL

소유주:

UAVMODEL CO., LTD.; 

ZHANGZHOU YICHENG TECHNOLOGY CO., LTD.;

XIAMEN GAOTENG TECHNOLOGY CO., LTD.

이메일:Sales@uavmodel.com

전화번호: +8613015671328

313, No.25, Jingxia Road, Wenpu Industrial Park, Jiaomei Town, Taiwan Investment Zone,

Unit 2502-3, No.1110, Jimei North Road, Software Park, Torch High-tech Zone, Xiamen

产品图片1 产品图片2

우리가 하는 일은 무엇인가요?

UAVMODEL은 선도적인 UAV 기체 제조업체입니다. 당사의 UAV 플랫폼은 산업 점검, 가스 및 석유, 정밀 농업, 매핑, 공공 안전, 건설, 임업 및 국방 분야의 전문적인 요구를 충족합니다.

10년 이상의 경험

500건 이상의 성공 사례

12개 이상의 업계 수상

우리의 비전

우리는 복잡한 환경을 위한 중대형 UAV 및 특수 UAV 기술의 R&D에 전념하고 있습니다. 당사는 설계, 생산, 테스트, 판매 및 서비스를 포함하여 당사의 기술을 기반으로 한 포괄적인 솔루션을 제공하는 데 중점을 둡니다.

愿景图片1 愿景图片2

100% 고객 만족이 우리의 최우선 과제입니다

복잡하고 신뢰할 수 있는 디지털 솔루션 사용

높은 수준의 고객 지원

업계 최고의 전문가들과 협력

우리와 협력하세요!

전문적이고 친절한 고객 서비스.
무료 또는 합리적인 배송.
다양한 결제 옵션: PayPal, 신용카드 및 은행 송금.
UAVMODEL은 수락 가능합니다.
적절한 제품 신고를 통한 빠르고 안정적인 배송.

运输图片

연중무휴 24시간 지원

연중무휴 24시간 실시간 기술 전문 지식 및 지원
엔지니어와 상담하여 답변과 조언을 얻으세요
지원 요청 및 계정 관리를 위한 고객 포털


© 2025 UAVMODEL. All rights reserved.

무료 배송

일부 국가 $100 이상

무료 반품

질문 없이

트러스트스코어 4.9

1000 이상

130-1567-1328

sales@uavmodel.com