G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
1 6

G12-M4 TETHERED POWER STATION

$4,800.00

Last 90 Days Sales: PCS

FYTSG12M4-33
TYPE: G12-M4-33m

Livraison prévue dans 15~21days jours après le paiement ;

Secure Checkout & Bank Transfer

American Express
Diners Club
Google Pay
JCB
Maestro
Mastercard
PayPal
Union Pay
Visa
Generic

Customers who can not place an order please contact us;

Tag : Automatic Cable Retraction , DJI Matrice 4E/4T , Drone Power System , G12-M4 Tethered Power Station , High Voltage Drone Power , Long Endurance Drone Power , Reliable Drone Power Supply , tethered drone system , tethered drones , TETHERED POWER STATION , Tethered UAV Power Solution , tethered UAV system
TYPE: G12-M4-33m

G12-M4 Tethered Power Station – Product Details

Ultra‑Long Flight Time

≥24h continuous power


Lightweight & Portable

Carrying case, one‑person transport


Rapid Deployment

Tool‑free quick mount, plug‑and‑play


Safe & Reliable

Contact‑free operation · multi‑protection

G12-M4 Tethered Power Station is designed for DJI Matrice 4T and Matrice 4E drones, providing over 24 hours of safe and reliable long‑endurance flight power. The L6 floodlight is optionally available to deliver wide‑area, high‑illuminance outdoor lighting.

The system mainly consists of the tether box (ground module), onboard power supply (air module), and the optional L6 floodlight. The tether box integrates AC/DC conversion, tether cable, automatic winding mechanism, servo motor, communication module, cooling system, and control management. It converts AC power from mains, generators, or mobile power sources into high‑voltage DC, transmitted through the tether cable to the onboard power supply, which then converts it to low‑voltage DC to power the drone and payloads such as the floodlight, enabling uninterrupted flight of 24 hours or more.

By mounting gimbal cameras, floodlights, searchlights, loudspeakers, and other payloads, the tethered drone can perform long‑duration video capture, area surveillance, high‑power lighting, search and illumination, public address, etc. It is widely used in cinematography, emergency lighting, communication command, aerial monitoring, public security, traffic supervision, disaster relief, emergency firefighting, news reporting, scientific research, and defense.

Flight altitude 30m / 50m Rated 1200W / Peak 1500W Smart auto wind/unwind IP54 / IPx4 protection
Overall Specifications
Compatible Models DJI Matrice 4E, DJI Matrice 4T
Supported Flight Altitude 30m or 50m; cable length optional 33m or 55m, with safety margin; custom lengths supported
Flight Duration >24h, depends on external power source
Safety Features Remote wireless high‑voltage on/off – no need to approach the tether box; automatic cable winding/unwinding synchronised with drone takeoff and landing; external power interruption triggers auto cable retrieval to prevent landing conflicts
Environmental Operating ‑20~45°C; storage ‑40~65°C
Ingress Protection Onboard unit IP54, tether box IPx4
Packaging Carrying case (D495×W410×H220mm), weight 3kg
Tether Box (Ground Module) Specifications
Input Voltage 190~240VAC, single‑phase 220VAC@50/60Hz
Output Voltage 600~850VDC (default 850VDC)
Output Power Rated 1200W continuous, peak 1500W
Cable Length 33m or 55m standard, custom available
Winding Speed 0~3m/s, intelligent dynamic continuous adjustment
Cable Tension 0~10N, adjustable torque limit, slope, and output continuously
Communication Wired/wireless, multi‑device interconnection, intelligent monitoring
Display Voltage, current, temperature, energy consumption, cable length, runtime, status, and fault logs
Control Methods Keypad, mobile App, remote host, drone remote controller (display, setting, control)
Protections Over‑/under‑voltage, over‑current, over‑temperature, short‑circuit; power‑off, cable over‑extension, cable break protection
Alarm Fault display on screen, audible buzzer
Cable Material Galvanised steel conductor + Teflon high‑temp insulation + tensile film jacket + high‑strength aramid fibre braid
Interfaces LP12 (in/out), AC switch, Bluetooth antenna, Type‑C
Dimensions D275×W146×H200mm (excluding feet and handle)
Weight Box 4.8kg, cable 3m or 5m (with light)
Onboard Power Supply (Air Module) Specifications
Input Voltage 600~850VDC (wide range)
Output Voltage 16.5VDC regulated
Output Power Rated 600W continuous, peak 800W
Mounting Replaces drone battery, direct plug‑in lock
Interfaces LP12 (input), XT30 (light output), drone battery connector
Dimensions 126×42×44/108mm (L‑shape)
Weight 370g (replaces 401g drone battery)
L6 Floodlight (Payload Module) Specifications
Light Power 600W, boost mode 1200W
Luminous Flux 100,000 lm @ ~168 lm/W
Operating Voltage 800~1000VDC (direct system supply, high voltage low current, lower temperature, higher illuminance)
Illuminated Area 1000㎡@30m, 3000㎡@50m; interchangeable lens for larger area
Illuminance 90 lux@20m, 42 lux@30m, 15 lux@50m
Weight (light unit) 270g
Mounting Tool‑free hand‑tightened screws under the belly, cable plugs into onboard supply
Control Keypad, App, remote host, drone remote controller; auto‑on during takeoff, auto‑off after landing; thermal and power‑derating protection. Manual mode: click for step dimming, long‑press for stepless dimming and strobe.
AS1 Speaker (Payload Module) Specifications
Rated Power 15W
Sound Pressure @1m 114dB
Broadcast Range ≥300m
Visual Range ≥500m
Broadcast Modes Live, recorded, media import, text‑to‑speech
Mounting Tool‑free hand‑tightened screws on top
Dimensions / Weight 73×70×47mm, 90g
AL1 Searchlight (Payload Module) Specifications
Max Power 32W
Centre Illuminance 17 lux@50m, 4.3 lux@100m
Illuminated Area 1300㎡@100m (normal), 2200㎡@100m (wide)
Operating Modes Constant, strobe
Gimbal Tilt ‑90°~35°, max speed 120°/s
Mounting Tool‑free hand‑tightened screws on top
Dimensions / Weight 79×164×28mm, 91g
T40S Speaker + Light Combo (Payload Module) Specifications
Max Power 40W
Sound Pressure @1m 120dB
Lighting Combined, 14° beam angle, 5‑colour strobe
Broadcast Methods 4G handheld mic, Skypixel 2, Pilot2, mini‑program; supports return audio
Illuminated Area 113㎡@50m, 471㎡@100m, 1063㎡@150m
Centre Illuminance 30 lux@50m, 7 lux@100m, 3 lux@150m
Gimbal ‑90° to +35°, coupled with drone camera
Mounting Tool‑free hand‑tightened on top
Dimensions / Weight 146×65×96mm, 175g
DS4 Warning Screen (Payload Module) Specifications
Screen Size 23.4 inches
Rated Power 45W
Text Playback Page flip, carousel; visibility ≥100m
Strobe Modes Single‑colour, alternating two‑colour, RGBYW; visibility ≥1000m
Control DJI PSDK, mobile App, WeChat mini‑program
Mounting Slider quick‑release (pre‑installed thumb screws)
Weight 240g
Optional Payload Modules (supports multiple mounts)
L6 Floodlight AS1 Speaker AL1 Searchlight T40S Speaker + Light Combo DS4 Warning Screen
Packing List
No. Item Model Qty Unit Remarks
1 Tether Box G12 1 pc
2 Onboard Power Supply P6-M4 1 pc
3 Floodlight L6-M4 1 pc
4 Power Cord 3×0.5mm² ×1.5m 1 pc For tether box, with connector
5
6
7
8
9
10
Note: The floodlight is optional; ignore related content if not selected.
Frequently Asked Questions
Q1: Can I touch the tether cable after high‑voltage is turned on?
No. The manual clearly states that no operation on the tether equipment is required during the entire flight after high‑voltage is enabled. The cable carries high voltage; although insulated and capable of withstanding 3500VDC, in humid conditions or if worn/cracked, there is a risk of leakage. Even with insulated gloves, contact is dangerous. Our system is contact‑free by design.
Q2: Can I turn on the tether box high‑voltage before starting the drone?
No. The drone performs a self‑check after power‑on and requires battery data communication. If high‑voltage is applied first, only power is provided without battery data, which may cause the drone to fail self‑check and report errors. The correct sequence is: start remote controller → start drone and wait for self‑check → apply AC power to tether box → enable high‑voltage → take off.
Q3: Do I need to constantly monitor the tether box during flight?
No. The operator should focus on the drone itself. Check the voltage on the remote controller screen – if it stays above 16V, power is normal. If it drops below 16V or an alarm occurs, land the drone first and then investigate.
Q4: The tether box display voltage fluctuates significantly and won’t stabilise. What to do?
Land the drone and check battery level or power source capacity. a) Drone battery is low – the tether supply must power the drone and payloads while charging the battery, triggering overload protection. b) Insufficient input power – triggers under‑voltage protection.
Q5: The remote controller alerts “Battery contact issue, return or land” or “Insufficient battery power, return or land”. How to handle?
This is normal and requires no action. Since both drone and payloads are powered by the tether system, the drone detects no battery output during flight. As long as the battery latch is secure, ignore the warning.
Q6: The remote controller shows “Strong wind, fly with caution”. What to do?
If this occurs in calm or light wind, check whether the payload is overweight or the cable tension is set too high.
Q7: If the working altitude is far below the cable length (e.g., 55m cable but only 10m needed), should I pull out all the cable beforehand?
No. Instead, approximately every hour, fly the drone higher to passively pull out the cable for heat dissipation, hover for about 1 minute, then return to the normal working altitude.
Q8: Why can’t I turn on the floodlight when the drone is on the ground?
The floodlight lacks active cooling and relies on drone propeller airflow for heat dissipation. The software prohibits turning it on before takeoff to a certain height and automatically turns it off after landing to prevent overheating.
You may also like
G70-M400 Tethered Power Station
Popular

G70-M400 Tethered Power Station

For Matrice 400, rated 7000W, supports 100m/200m altitude, high‑voltage DC, intelligent winding, safe and reliable.
Altitude 100m/200m 7000W
View Details
G35-M400 Tethered Power Station
Lightweight

G35-M400 Tethered Power Station

For Matrice 400, rated 3500W, 100m altitude, light design, auto wind/unwind, safe and reliable.
Altitude 100m 3500W
View Details
G35-M30 Tethered Power Station
Compact

G35-M30 Tethered Power Station

For DJI M30 series, rated 3500W, 100m altitude, portable, intelligent winding, ideal for mobile patrol.
For M30 3500W
View Details

FAQS

1. COMMENT PASSER MA COMMANDE ?

Il vous suffit de choisir votre style sur la page du produit, puis de cliquer sur le bouton « Ajouter au panier » et de suivre les étapes simples pour finaliser votre commande.

Nous préparerons votre commande et vous informerons lorsqu'elle sera en route !

2. COMBIEN DE TEMPS VA PRENDRE L'EXPÉDITION DE MA COMMANDE ?

Les commandes sont généralement expédiées dans un délai de 5 à 10 jours ouvrables. Pour les commandes internationales, le transit prendra 1 à 2 semaines supplémentaires.

3. MON NUMÉRO DE SUIVI NE FONCTIONNE PAS

Les numéros de suivi peuvent prendre 3 à 5 jours pour apparaître dans le système du transporteur. Parfois, le transporteur peut perdre une commande. Si le numéro de suivi ne fonctionne toujours pas dans quelques jours, veuillez contacter le transporteur.

4. J'AI BESOIN D'AIDE AVEC UNE COMMANDE EN RETARD

Les commandes sont généralement expédiées dans un délai de 5 à 8 jours ouvrables. Pour les commandes internationales, le transit prendra 1 à 2 semaines supplémentaires.

Si votre commande n'est pas arrivée après 10 jours ouvrables (national) et 20 jours ouvrables (international), veuillez contacter notre équipe, nous sommes heureux de vous aider.

Les produits qui doivent être personnalisés, le temps de production est de 10 à 25 jours pour l'expédition, les détails du produit seront annoncés.

5. QUEL TYPE DE PAIEMENTS ACCEPTEZ-VOUS ?

Nous acceptons Visa, Mastercard ainsi que Paypal.

6. QUAND MA CARTE SERA-T-ELLE DÉBITÉE ?

Juste après que votre commande a été passée avec succès.

7. QUELLE EST LA SÉCURITÉ DE MES INFORMATIONS PERSONNELLES ?

Nous adhérons aux normes les plus élevées de l'industrie pour protéger vos informations personnelles lors de votre passage à la caisse et de votre achat.

Vos informations de carte de crédit sont cryptées pendant la transmission à l'aide de la technologie de couche de sockets sécurisée (SSL), qui est largement utilisée sur Internet pour le traitement des paiements. Vos informations de carte de crédit ne sont utilisées que pour compléter la transaction demandée et ne sont pas ensuite stockées.

7. Sécurité des achats garantie

Nous utilisons PAYPAL pour collecter les paiements. Pour plus de détails, vous pouvez consulter le site officiel de PAYPAL pour garantir vos fonds d'achat.

https://www.paypal.com/webapps...

8. Quelle livraison ?

Nous coopérons avec les entreprises de transport DHL, FedEx, EMS, vous pouvez choisir librement lors de la passation de commandes ;

DHL : https://www.dhl.com/

FedEx :https://www.fedex.com/

EMS:https://www.ems.com.cn/

Suivi Logistique:https://www.uavmodel.com/apps/17TRACK 

9.Problème de remboursement ?

raison des propres raisons de l'acheteur, entraînant un remboursement. Ce site ne sera pas responsable du paiement des frais de traitement. Les frais d'expédition ne sont pas facturés pour les produits retournés.

Si vous payez par carte de crédit, votre paiement pourrait être refusé au moment du paiement par notre système en défense contre une éventuelle fraude à la carte de crédit. Il est conseillé d'appeler votre société de carte de crédit ou votre banque à l'avance pour les informer de l'achat afin qu'il ne soit pas refusé.
Dans de telles circonstances, voici 3 solutions pour vous :
1. Si vous avez un compte PayPal, veuillez essayer de payer par PayPal.
2. Veuillez passer à vos autres cartes de crédit/débit.
3. Si vous n'avez pas de compte PayPal, veuillez sélectionner PayPal à la page de paiement et cliquer sur le bouton de finalisation de la commande. Vous serez ensuite dirigé vers une page avec accès à la fois à PayPal et au paiement par carte de débit/crédit (pour cette dernière option, vous n'avez pas besoin de vous inscrire à PayPal).
Comme suit :


Étape 1. Sélectionnez PayPal (même si vous n'avez pas de compte PayPal)


Étape 2. Cliquez sur "Payer par carte de débit ou de crédit".


Étape 3. Remplissez vos informations de carte de crédit et finalisez votre commande.

Informations sur le virement bancaire :

Numéro de compte : 63001185921
Nom du titulaire : Xiamen Gaoteng Trading Co., Ltd.
Monnaie de support : AUD CAD CHF DKK EUR GBP HKD JPY NOK NZD SEK SGD USD ZAR
Nom de la banque : JPMorgan Chase Bank N.A. Succursale de Hong Kong
Emplacement de la banque Pays : HONG KONG, CHINE
Adresse de la banque : CHATER HOUSE, 8 CONNAUGHT ROAD, CENTRAL, HONG KONG
Type de compte : Courant
Swift/BIC : CHASHKHH (CHASHKHHXXX, si 11 caractères sont requis)
Numéro de routage : 007863
Code bancaire : 007
Numéro de succursale : 863
Veuillez inclure le mémo/message suivant au destinataire lors du paiement : [Nom de l'acheteur][Numéro de facture/contrat][Produit]

Propriété : MODELDUAV CO., LIMITED ; ZHANGZHOU YICHENG TECHNOLOGY CO., LTD. ; XIAMEN GAOTENG TECHNOLOGY CO., LTD.

Email:Sales@uavmodel.com

Téléphone : +8613015671328

MODELDUAV

Propriété : UAVMODEL CO., LIMITED ; ZHANGZHOU YICHENG TECHNOLOGY CO., LTD. ;XIAMEN GAOTENG TECHNOLOGY CO., LTD.

Email : Sales@uavmodel.com

313, No.25, Jingxia Road, Parc industriel de Wenpu, Ville de Jiaomei, Zone d'investissement de Taïwan,

Unité 2502-3, No.1110, Route Nord Jimei, Parc de logiciels, Zone haute technologie Torch, Xiamen

 

Que faisons-nous vraiment ?

UAVMODEL est un fabricant de structures aériennes UAV de premier plan. Nos plateformes UAV sont conçues pour répondre aux besoins professionnels de diverses industries, telles que l'inspection industrielle, le gaz et le pétrole, l'agriculture de précision, la cartographie, la sécurité publique, la construction, la foresterie et les départements de défense.

10+ Années d'expérience

500+ Cas réussis

12+ Prix de l'industrie

 

Notre Vision

Notre entreprise s'engage dans la recherche et le développement de drones de taille moyenne et grande ainsi que de technologies de drones à usage spécial qui s'adaptent à des environnements d'application complexes. Elle est principalement engagée dans la recherche et le développement, la conception, la production, la fabrication, les tests, la vente et le service de drones et de leur équipement de mission aéroporté, et fournit des solutions système aux utilisateurs basées sur sa propre technologie. Notre modèle commercial actuel est la vente de machines complètes et d'accessoires, des services d'application diversifiés et la recherche préliminaire sur des technologies de drones avancées.

Coopérez avec nous !

Un service client professionnel et amical.
Expédition gratuite ou à faible coût ou à coût raisonnable. Options de paiement par PayPal, carte de crédit et virement bancaire. le modèle uav est acceptable.
Expédition rapide et fiable avec déclaration de produit

support 24/7

Expertise technique et support en direct 24/7
Parlez avec nos ingénieurs pour des réponses et des conseils
Portail Client pour les Demandes de Support et la Gestion de Compte

 

Livraison gratuite

Certains pays plus de 100 $

Retours gratuits

Aucune question posée

TrustScore 4.9

Plus de 1000

130-1567-1328

ventes@uavmodel.com