G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
G12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI DronesG12-M4 TETHERED POWER STATION – Long Endurance Power System for DJI Drones
1 6

UAVMODEL

G12-M4 TETHERED POWER STATION

$4,800.00

Last 90 Days Sales: PCS

FYTSG12M4-33
TYPE: G12-M4-33m

Consegna prevista entro 15~21days giorni dopo il pagamento;

Secure Checkout & Bank Transfer

American Express
Diners Club
Google Pay
JCB
Maestro
Mastercard
PayPal
Union Pay
Visa
Generic

I clienti che non possono effettuare un ordine, per favore contattateci;

Tag : Automatic Cable Retraction , DJI Matrice 4E/4T , Drone Power System , G12-M4 Tethered Power Station , High Voltage Drone Power , Long Endurance Drone Power , Reliable Drone Power Supply , tethered drone system , tethered drones , TETHERED POWER STATION , Tethered UAV Power Solution , tethered UAV system
TYPE: G12-M4-33m

G12-M4 Tethered Power Station – Product Details

Ultra‑Long Flight Time

≥24h continuous power


Lightweight & Portable

Carrying case, one‑person transport


Rapid Deployment

Tool‑free quick mount, plug‑and‑play


Safe & Reliable

Contact‑free operation · multi‑protection

G12-M4 Tethered Power Station is designed for DJI Matrice 4T and Matrice 4E drones, providing over 24 hours of safe and reliable long‑endurance flight power. The L6 floodlight is optionally available to deliver wide‑area, high‑illuminance outdoor lighting.

The system mainly consists of the tether box (ground module), onboard power supply (air module), and the optional L6 floodlight. The tether box integrates AC/DC conversion, tether cable, automatic winding mechanism, servo motor, communication module, cooling system, and control management. It converts AC power from mains, generators, or mobile power sources into high‑voltage DC, transmitted through the tether cable to the onboard power supply, which then converts it to low‑voltage DC to power the drone and payloads such as the floodlight, enabling uninterrupted flight of 24 hours or more.

By mounting gimbal cameras, floodlights, searchlights, loudspeakers, and other payloads, the tethered drone can perform long‑duration video capture, area surveillance, high‑power lighting, search and illumination, public address, etc. It is widely used in cinematography, emergency lighting, communication command, aerial monitoring, public security, traffic supervision, disaster relief, emergency firefighting, news reporting, scientific research, and defense.

Flight altitude 30m / 50m Rated 1200W / Peak 1500W Smart auto wind/unwind IP54 / IPx4 protection
Overall Specifications
Compatible Models DJI Matrice 4E, DJI Matrice 4T
Supported Flight Altitude 30m or 50m; cable length optional 33m or 55m, with safety margin; custom lengths supported
Flight Duration >24h, depends on external power source
Safety Features Remote wireless high‑voltage on/off – no need to approach the tether box; automatic cable winding/unwinding synchronised with drone takeoff and landing; external power interruption triggers auto cable retrieval to prevent landing conflicts
Environmental Operating ‑20~45°C; storage ‑40~65°C
Ingress Protection Onboard unit IP54, tether box IPx4
Packaging Carrying case (D495×W410×H220mm), weight 3kg
Tether Box (Ground Module) Specifications
Input Voltage 190~240VAC, single‑phase 220VAC@50/60Hz
Output Voltage 600~850VDC (default 850VDC)
Output Power Rated 1200W continuous, peak 1500W
Cable Length 33m or 55m standard, custom available
Winding Speed 0~3m/s, intelligent dynamic continuous adjustment
Cable Tension 0~10N, adjustable torque limit, slope, and output continuously
Communication Wired/wireless, multi‑device interconnection, intelligent monitoring
Display Voltage, current, temperature, energy consumption, cable length, runtime, status, and fault logs
Control Methods Keypad, mobile App, remote host, drone remote controller (display, setting, control)
Protections Over‑/under‑voltage, over‑current, over‑temperature, short‑circuit; power‑off, cable over‑extension, cable break protection
Alarm Fault display on screen, audible buzzer
Cable Material Galvanised steel conductor + Teflon high‑temp insulation + tensile film jacket + high‑strength aramid fibre braid
Interfaces LP12 (in/out), AC switch, Bluetooth antenna, Type‑C
Dimensions D275×W146×H200mm (excluding feet and handle)
Weight Box 4.8kg, cable 3m or 5m (with light)
Onboard Power Supply (Air Module) Specifications
Input Voltage 600~850VDC (wide range)
Output Voltage 16.5VDC regulated
Output Power Rated 600W continuous, peak 800W
Mounting Replaces drone battery, direct plug‑in lock
Interfaces LP12 (input), XT30 (light output), drone battery connector
Dimensions 126×42×44/108mm (L‑shape)
Weight 370g (replaces 401g drone battery)
L6 Floodlight (Payload Module) Specifications
Light Power 600W, boost mode 1200W
Luminous Flux 100,000 lm @ ~168 lm/W
Operating Voltage 800~1000VDC (direct system supply, high voltage low current, lower temperature, higher illuminance)
Illuminated Area 1000㎡@30m, 3000㎡@50m; interchangeable lens for larger area
Illuminance 90 lux@20m, 42 lux@30m, 15 lux@50m
Weight (light unit) 270g
Mounting Tool‑free hand‑tightened screws under the belly, cable plugs into onboard supply
Control Keypad, App, remote host, drone remote controller; auto‑on during takeoff, auto‑off after landing; thermal and power‑derating protection. Manual mode: click for step dimming, long‑press for stepless dimming and strobe.
AS1 Speaker (Payload Module) Specifications
Rated Power 15W
Sound Pressure @1m 114dB
Broadcast Range ≥300m
Visual Range ≥500m
Broadcast Modes Live, recorded, media import, text‑to‑speech
Mounting Tool‑free hand‑tightened screws on top
Dimensions / Weight 73×70×47mm, 90g
AL1 Searchlight (Payload Module) Specifications
Max Power 32W
Centre Illuminance 17 lux@50m, 4.3 lux@100m
Illuminated Area 1300㎡@100m (normal), 2200㎡@100m (wide)
Operating Modes Constant, strobe
Gimbal Tilt ‑90°~35°, max speed 120°/s
Mounting Tool‑free hand‑tightened screws on top
Dimensions / Weight 79×164×28mm, 91g
T40S Speaker + Light Combo (Payload Module) Specifications
Max Power 40W
Sound Pressure @1m 120dB
Lighting Combined, 14° beam angle, 5‑colour strobe
Broadcast Methods 4G handheld mic, Skypixel 2, Pilot2, mini‑program; supports return audio
Illuminated Area 113㎡@50m, 471㎡@100m, 1063㎡@150m
Centre Illuminance 30 lux@50m, 7 lux@100m, 3 lux@150m
Gimbal ‑90° to +35°, coupled with drone camera
Mounting Tool‑free hand‑tightened on top
Dimensions / Weight 146×65×96mm, 175g
DS4 Warning Screen (Payload Module) Specifications
Screen Size 23.4 inches
Rated Power 45W
Text Playback Page flip, carousel; visibility ≥100m
Strobe Modes Single‑colour, alternating two‑colour, RGBYW; visibility ≥1000m
Control DJI PSDK, mobile App, WeChat mini‑program
Mounting Slider quick‑release (pre‑installed thumb screws)
Weight 240g
Optional Payload Modules (supports multiple mounts)
L6 Floodlight AS1 Speaker AL1 Searchlight T40S Speaker + Light Combo DS4 Warning Screen
Packing List
No. Item Model Qty Unit Remarks
1 Tether Box G12 1 pc
2 Onboard Power Supply P6-M4 1 pc
3 Floodlight L6-M4 1 pc
4 Power Cord 3×0.5mm² ×1.5m 1 pc For tether box, with connector
5
6
7
8
9
10
Note: The floodlight is optional; ignore related content if not selected.
Frequently Asked Questions
Q1: Can I touch the tether cable after high‑voltage is turned on?
No. The manual clearly states that no operation on the tether equipment is required during the entire flight after high‑voltage is enabled. The cable carries high voltage; although insulated and capable of withstanding 3500VDC, in humid conditions or if worn/cracked, there is a risk of leakage. Even with insulated gloves, contact is dangerous. Our system is contact‑free by design.
Q2: Can I turn on the tether box high‑voltage before starting the drone?
No. The drone performs a self‑check after power‑on and requires battery data communication. If high‑voltage is applied first, only power is provided without battery data, which may cause the drone to fail self‑check and report errors. The correct sequence is: start remote controller → start drone and wait for self‑check → apply AC power to tether box → enable high‑voltage → take off.
Q3: Do I need to constantly monitor the tether box during flight?
No. The operator should focus on the drone itself. Check the voltage on the remote controller screen – if it stays above 16V, power is normal. If it drops below 16V or an alarm occurs, land the drone first and then investigate.
Q4: The tether box display voltage fluctuates significantly and won’t stabilise. What to do?
Land the drone and check battery level or power source capacity. a) Drone battery is low – the tether supply must power the drone and payloads while charging the battery, triggering overload protection. b) Insufficient input power – triggers under‑voltage protection.
Q5: The remote controller alerts “Battery contact issue, return or land” or “Insufficient battery power, return or land”. How to handle?
This is normal and requires no action. Since both drone and payloads are powered by the tether system, the drone detects no battery output during flight. As long as the battery latch is secure, ignore the warning.
Q6: The remote controller shows “Strong wind, fly with caution”. What to do?
If this occurs in calm or light wind, check whether the payload is overweight or the cable tension is set too high.
Q7: If the working altitude is far below the cable length (e.g., 55m cable but only 10m needed), should I pull out all the cable beforehand?
No. Instead, approximately every hour, fly the drone higher to passively pull out the cable for heat dissipation, hover for about 1 minute, then return to the normal working altitude.
Q8: Why can’t I turn on the floodlight when the drone is on the ground?
The floodlight lacks active cooling and relies on drone propeller airflow for heat dissipation. The software prohibits turning it on before takeoff to a certain height and automatically turns it off after landing to prevent overheating.
You may also like
G70-M400 Tethered Power Station
Popular

G70-M400 Tethered Power Station

For Matrice 400, rated 7000W, supports 100m/200m altitude, high‑voltage DC, intelligent winding, safe and reliable.
Altitude 100m/200m 7000W
View Details
G35-M400 Tethered Power Station
Lightweight

G35-M400 Tethered Power Station

For Matrice 400, rated 3500W, 100m altitude, light design, auto wind/unwind, safe and reliable.
Altitude 100m 3500W
View Details
G35-M30 Tethered Power Station
Compact

G35-M30 Tethered Power Station

For DJI M30 series, rated 3500W, 100m altitude, portable, intelligent winding, ideal for mobile patrol.
For M30 3500W
View Details

FAQ

1. COME POSSO EFFETTUARE IL MIO ORDINE?

  • Scegli semplicemente il tuo stile nella pagina del prodotto, quindi clicca sul pulsante "Aggiungi al carrello" e segui i semplici passaggi per completare il tuo ordine.
  • Ti prepareremo l'ordine e ti faremo sapere quando sarà in arrivo!

2. QUANTO TEMPO CI VORRÀ PER SPEDIRE IL MIO ORDINE?

  • Gli ordini vengono solitamente spediti entro 5-10 giorni lavorativi. Per gli ordini internazionali, il transito richiederà ulteriori 1-2 settimane.

3. IL MIO NUMERO DI TRACCIAMENTO NON FUNZIONA

  • I numeri di tracciamento possono impiegare da 3 a 5 giorni per comparire nel sistema del corriere. Occasionalmente, il corriere può smarrire un ordine. Se il numero di tracciamento non funziona ancora dopo qualche giorno, si prega di contattare il corriere.

4. HO BISOGNO DI AIUTO CON UN ORDINE IN RITARDO

  • Gli ordini vengono generalmente spediti entro 5-8 giorni lavorativi. Per gli ordini internazionali, il transito richiederà ulteriori 1-2 settimane.
  • Se il tuo ordine non è arrivato dopo 10 giorni lavorativi (nazionale) e 20 giorni lavorativi (internazionale), ti preghiamo di contattare il nostro team, saremo felici di aiutarti.
  • Prodotti che necessitano di personalizzazione, il tempo di produzione è di 10-25 giorni per la spedizione, i dettagli del prodotto saranno comunicati.

5. Accettiamo i seguenti metodi di pagamento sicuri:

Carte di Credito (tramite Airwallex):

  • Visa / Mastercard / American Express
  • Protetto daAirwallex, una piattaforma di pagamento conforme a livello globale

Pagamenti di Terze Parti:

  • PayPal (Conti Personali e Aziendali)

Bonifico Bancario:

  • Trasferimento di Conto Aziendale (Supporto SWIFT/IBAN)

6. QUANDO VERRÀ ADDEBITATA LA MIA CARTA?

Subito dopo che il tuo ordine è stato effettuato con successo.

7. QUANTO È SICURA LA MIA INFORMAZIONE PERSONALE?

  • Ci atteniamo ai più alti standard del settore per proteggere le tue informazioni personali durante il pagamento e l'acquisto.
  • La tua carta di credito viene crittografata durante la trasmissione utilizzando la tecnologia Secure Socket Layer (SSL), ampiamente utilizzata su Internet per l'elaborazione dei pagamenti. Le informazioni della tua carta di credito vengono utilizzate solo per completare la transazione richiesta e non vengono successivamente memorizzate.

7. Sicurezza negli acquisti garantita

Utilizziamo PAYPAL per raccogliere i pagamenti. Per maggiori dettagli, puoi consultare il sito ufficiale di PAYPAL per garantire i fondi del tuo acquisto.

https://www.paypal.com/webapps...

8.Quale consegna?

Collaboriamo con le compagnie di spedizione DHL, FedEx, EMS, puoi scegliere liberamente al momento dell'ordine;

9. Problema di rimborso?

A causa di motivi imputabili all'acquirente, si è reso necessario un rimborso. Questo sito web non sarà responsabile del pagamento delle spese di gestione. Le spese di spedizione non sono addebitate per i prodotti restituiti.

10、Risposta: La responsabilità dello sdoganamento dipende dai termini commerciali (ad esempio, EXW, FOB, DDP). Generalmente:

  • I nostri Termini PredefinitiIl cliente (destinatario) deve occuparsi dello sdoganamento e pagare tutte le tasse/dazi.
  • Eccezioni: Se il tuo ordine indica "DDP (Delivered Duty Paid)", ci occuperemo dello sdoganamento.

11、Risposta: Documenti generalmente richiesti:

  • ID (ad es., passaporto) o numero di partita IVA;
  • Fattura commerciale (contattaci dopo l'acquisto);
  • ConsiglioContatta in anticipo la tua dogana locale!

12、Risposta: I dazi sono determinati dalla dogana del tuo paese in base al tipo di prodotto, al valore e alle normative. Per stimare i costi:

  • Controlla il sito web delle dogane locali;
  • Utilizza strumenti di terze parti (ad esempio, Avalara, DutyCalculator).

13、Risposta:

  • RitardiContattare direttamente la dogana per inviare documenti/pagamenti. Possiamo fornire numeri di tracciamento o fatture.
  • Distruzione: Le perdite dovute a una mancata risposta per lo sdoganamento saranno a carico del cliente.
  • EccezioniSe causato da errori nella nostra documentazione, contattaci per assistenza.

14、Risposta: Riceverai una fattura commerciale e una lista di imballaggio via email. Per altri documenti, contattasales@uavmodel.com(response entro 24 ore).

15、RispostaI seguenti prodotti possono essere sequestrati o respinti:

  • Articoli proibiti nel tuo paese (ad esempio, cosmetici con ingredienti vietati);
  • Prodotti senza le certificazioni richieste (ad esempio, elettronica priva del marchio CE);
  • Valore sottostimato (potrebbe sollevare sospetti di evasione fiscale).

Se paghi con carta di credito, il tuo pagamento potrebbe essere in qualche modo rifiutato al checkout dal nostro sistema in difesa contro possibili frodi con carta di credito. È una buona idea contattare in anticipo la tua compagnia di carte di credito o la tua banca per informarli dell'acquisto, in modo che non venga rifiutato.
In tali circostanze, ecco 3 soluzioni per te:
1. Se hai un account PayPal, ti preghiamo di provare a pagare tramite PayPal.
2. Si prega di passare alle altre carte di credito/debito.
3. Se non hai un account PayPal, seleziona comunque PayPal nella pagina di checkout e clicca sul pulsante per completare l'ordine. Sarai quindi reindirizzato a una pagina con accesso sia a PayPal che al pagamento con carta di debito/credito (per quest'ultima opzione, non è necessario registrarsi per PayPal).
Come segue:


Passo 1. Seleziona PayPal (anche se non hai un account PayPal)


Passo 2. Clicca su "Paga con Carta di Debito o Credito".


Passo 3. Compila le informazioni della tua carta di credito e completa il tuo ordine.

Informazioni sul bonifico bancario:

Numero di conto: 63001185921
Nome del titolare: Xiamen Gaoteng Trading Co., Ltd.
Valuta di supporto: AUD CAD CHF DKK EUR GBP HKD JPY NOK NZD SEK SGD USD ZAR
Nome della Banca: JPMorgan Chase Bank N.A. Filiale di Hong Kong
Posizione della Banca Paese: HONG KONG, CINA
Indirizzo della Banca: CHATER HOUSE, 8 CONNAUGHT ROAD, CENTRAL, HONG KONG
Tipo di conto: Corrente
Swift/BIC: CHASHKHH (CHASHKHHXXX, se sono richiesti 11 caratteri)
Numero di routing: 007863
Codice Bancario: 007
Numero di filiale: 863
Si prega di includere il seguente promemoria/messaggio al destinatario quando si effettua un pagamento: [Buyer Name][Invoice/Contract Number][Product]

UAVMODEL

Proprietà:

UAVMODEL CO., LTD.; 

ZHANGZHOU YICHENG TECHNOLOGY CO., LTD.;

XIAMEN GAOTENG TECHNOLOGY CO., LTD.

Email:Sales@uavmodel.com

Telefono: +8613015671328

313, No.25, Jingxia Road, Wenpu Industrial Park, Jiaomei Town, Taiwan Investment Zone,

Unità 2502-3, No.1110, Jimei North Road, Software Park, Torch High-tech Zone, Xiamen

产品图片1 产品图片2

Cosa facciamo realmente?

UAVMODEL è un produttore leader di fusoliere UAV. Le nostre piattaforme UAV soddisfano esigenze professionali in ispezione industriale, gas e petrolio, agricoltura di precisione, mappatura, sicurezza pubblica, costruzione, silvicoltura e difesa.

Oltre 10 anni di esperienza

500+ Casi di Successo

12+ Premi del Settore

La nostra Visione

Siamo impegnati nella R&S di UAV di medie e grandi dimensioni e tecnologie UAV specializzate per ambienti complessi. Il nostro focus include progettazione, produzione, collaudo, vendita e assistenza, offrendo soluzioni complete basate sulla nostra tecnologia.

愿景图片1 愿景图片2

La soddisfazione del cliente al 100% è la nostra priorità

Utilizzando Soluzioni Digitali Complesse e Affidabili

Alti Standard di Assistenza Clienti

Lavorare con i principali esperti di mercato

Collabora con noi!

Servizio clienti professionale e cordiale.
Spedizione gratuita o a prezzi accessibili.
Opzioni di pagamento multiple: PayPal, Carta di Credito e Bonifico Bancario.
UAVMODEL è accettabile.
Spedizione veloce e affidabile con corretta dichiarazione del prodotto.

运输图片

Supporto 24/7

Assistenza e competenza tecnica attiva 24 ore su 24, 7 giorni su 7
Parla con i nostri ingegneri per risposte e consigli
Portale Clienti per Richieste di Supporto e Gestione Account


© 2025 UAVMODEL. Tutti i diritti riservati.

Spedizione gratuita

Alcuni paesi oltre $100

Resi gratuiti

Nessuna domanda fatta

TrustScore 4.9

Più di 1000

130-1567-1328

sales@uavmodel.com