Tethered Power Station for DJI M30 Series Drones - Long Endurance SolutionTethered Power Station for DJI M30 Series Drones - Long Endurance Solution
Tethered Power Station for DJI M30 Series Drones - Long Endurance SolutionTethered Power Station for DJI M30 Series Drones - Long Endurance Solution
Tethered Power Station for DJI M30 Series Drones - Long Endurance SolutionTethered Power Station for DJI M30 Series Drones - Long Endurance Solution
Tethered Power Station for DJI M30 Series Drones - Long Endurance SolutionTethered Power Station for DJI M30 Series Drones - Long Endurance Solution
Tethered Power Station for DJI M30 Series Drones - Long Endurance SolutionTethered Power Station for DJI M30 Series Drones - Long Endurance Solution
1 5

UAVMODEL

G35-M30 TETHERED POWER STATION

$7,130.00

Last 90 Days Sales: PCS

FYTSG35M30-55
TYPE: G35-M30-55m

Consegna prevista entro 7~15DAYS giorni dopo il pagamento;

Secure Checkout & Bank Transfer

American Express
Diners Club
Google Pay
JCB
Maestro
Mastercard
PayPal
Union Pay
Visa
Generic

I clienti che non possono effettuare un ordine, per favore contattateci;

Tag : DJI M30 Drone Power , Long Endurance UAV , Long Flight Drone Power Supply , Professional UAV Tether System , Reliable Drone Power Solution , tethered drone power , tethered drone system , TETHERED POWER STATION , Tethered UAV System
TYPE: G35-M30-55m

G35-M30 Tethered Power System – Details

Extended Flight Time

>24h continuous power


Light & Portable

Box 9.2kg, rolling case


Quick Setup

Tool‑free, plug‑and‑play


Safe & Reliable

Contactless operation · multiple protections

G35-M30 Tethered Power System is designed for DJI Matrice 30 and Matrice 30T, providing 24h or more of safe and reliable long‑endurance flight power. It addresses the limitations of short battery life, rapid power drain with heavy payloads, and frequent battery swaps, making it ideal for long‑duration missions or high‑power payloads.

The system consists of a ground‑based tether box and an onboard power supply. The integrated tether box incorporates AC/DC conversion, tether cable, automatic winding mechanism, servo motor, communication modules, cooling system, and control management. The lightweight DC/DC onboard converter steps down 850V high voltage to the low voltage required by the drone and its payloads, providing stable, regulated, and safe power.

With 850V high‑voltage transmission, the tether cable is thinner, lighter, and has lower wind resistance, reducing the load on the drone’s propulsion system. The new AI‑driven speed and torque control supports up to 5m/s cable retraction/extraction, quick ascent/descent, and emergency stops – without cable snagging, jitter, or abrupt tugs. This enables truly automatic, contactless, and operator‑free cable management. Multi‑device connectivity is supported via the onboard interface, mobile app, PC, and drone remote controller.

The Matrice 30 series tethered drone, with its built‑in gimbal camera, can carry payloads such as floodlights, searchlights, loudspeakers, communication relays, and optical display units, enabling long‑endurance aerial video, area monitoring, high‑power illumination, searchlighting, public address, relay communication, and warning/display functions.

Key Features: 24h endurance · Light & portable for easy transport · Ultra‑fast deployment · Simple operation · Regulated voltage with redundancy · Safe high‑voltage transmission · Smart multi‑device control · Wide payload compatibility
Flight height 50m / 100m Rated 3500W / Peak 4000W Intelligent auto wind/unwind IP54 / IPx4 protection
General Specifications
Compatible Models DJI Matrice 30, Matrice 30T
Supported Flight Height 50m or 100m; cable length 55m or 110m optional, with safety margin; custom lengths supported
Flight Duration > 24h (depends on external power supply)
Safety Features Remote contactless HV on/off; automatic cable retraction/extraction; automatic cable recovery on external power loss for safe landing; fault alarms and HV shutdown for cable break, detachment, or short circuit to prevent electric shock
Environmental Operating temp: -20~45℃, Storage: -40~65℃
Protection Rating Onboard power supply IP54, Tether box IPx4
Packaging Rolling four‑wheel flight case; accommodates tether box, onboard power, lights, accessories, and documents
Case Dimensions 350(D) × 560(W) × 300(H) mm
Case Weight 6.5 kg
Tether Box (Ground Unit) Specifications
Input Voltage 190~240VAC wide range, single‑phase 220VAC, 50/60Hz
Output Voltage 600~850VDC (default 850VDC)
Output Power Rated continuous 3500W, peak 4000W
Tether Cable Length 55m or 110m standard, custom available
Cable Retract/Extend Speed 0~5m/s, intelligent dynamic adjustment with variable acceleration control
Cable Tension 0~15N, adjustable torque with intelligent continuous regulation of torque and torque slope
Communication Wired & wireless, multi‑device interconnection, smart monitoring; optional fiber optic link
Display Voltage, current, temperature, energy consumption, cable length, runtime, status, and fault logs
Control Methods Keypad on box, mobile APP, remote PC, drone remote controller
Protections Over/under voltage, overcurrent, overtemperature, short circuit; power loss, over‑extension, cable break protection
Alarms & Alerts Fault display on screen, audible buzzer alert
Cable Construction Silver‑plated copper + Teflon insulation + single‑mode fiber + anti‑tensile film jacket + high‑strength aviation braided outer layer
Interfaces Input LP16, Output LP12, AC switch, Bluetooth antenna, Type‑C, FC optical port
Dimensions (excl. feet & handle) 360(D) × 185(W) × 260(H) mm
Weight Box: 9.2kg; Cable: 5.5g/m or 8.5g/m (with light)
Onboard Power Supply (Air Unit) Specifications
Input Voltage 600~850VDC wide range
Output Voltage 25.5VDC regulated
Output Power Rated continuous 3000W, peak 3500W
Installation Replaces one drone battery, direct plug‑in locking
Interfaces Input LP12, Output XT30 (for light) and drone battery connector
Dimensions 156 × 68 × 48 mm
Weight 560g (replaces 685g battery)
L12 Floodlight (Payload Module) Specifications
Lighting Power 1200W, Boost mode 2400W
Luminous Flux 200,000 lm, efficiency ~168 lm/W
Operating Voltage 800~1000VDC, direct system supply – high voltage, low current, lower temperature, higher illumination
Illuminated Area 3000m² at 50m, 10000m² at 100m (interchangeable lens for larger area)
Illuminance 157 lux at 30m, 54 lux at 50m, 13 lux at 100m
Light Set Weight 180g per butterfly lamp, total 780g (incl. cables and rubber straps)
Installation Quick‑mount with arm rubber straps, plug into onboard supply
Control Box keypad, mobile APP, remote PC, drone remote; auto‑on at takeoff, auto‑off at landing; over‑temp and power‑derating protection
T60S Searchlight (Payload Module) Specifications
Max Power 60W
Illumination Combined, 14° beam angle
Range ≥300m
Illuminated Area 113m² at 50m, 471m² at 100m, 1063m² at 150m
Center Illuminance 36 lux at 50m, 8.7 lux at 100m, 3.7 lux at 150m
Installation Slider quick‑mount (pre‑installed thumbscrew)
Dimensions & Weight 163 × 93 × 40 mm, 125g
U30 Speaker & Searchlight Combo (Payload Module) Specifications
Max Power 45W
Sound Pressure @1m 114dB
Illumination Combined, 14° beam, five‑color strobe
Audio Modes Audio playback, recorded voice, TTS text‑to‑speech
Illuminated Area 113m² at 50m, 471m² at 100m, 1063m² at 150m
Center Illuminance 30 lux at 50m, 7 lux at 100m, 3 lux at 150m
Gimbal 0° to +90° controllable, sync with drone camera
Installation Slider quick‑mount (pre‑installed thumbscrew)
Dimensions & Weight 138 × 103 × 72 mm, 170g
DS4 Warning Display (Payload Module) Specifications
Screen Size 23.4 inches
Rated Power 45W
Text Display Page‑flip, scrolling modes; visible distance ≥100m
Strobe Modes Single‑color, alternating two‑color (red/green/blue/yellow/white); visible ≥1000m
Control DJI PSDK, mobile APP, WeChat mini‑program
Installation Slider quick‑mount (pre‑installed thumbscrew)
Weight 240g
Optional Payload Modules Overview

Supports multiple payloads: L12 Floodlight (4 units), T60S Searchlight, U30 Speaker & Searchlight Combo, DS4 Warning Display.

Package Contents
No. Item Model Qty Unit Remarks
1 Tether Box G35 1 unit
2 Onboard Power Supply P20-M30 1 unit
3 Floodlight L12-M30 1 set Includes 4 butterfly lamps (optional)
4 Power Cord 3×1.5mm²×1.5m 1 pcs Tether box accessory, with connector
5 Distribution Box 1‑to‑4 1 pcs Floodlight accessory, with connector
6 Slider Bracket / 1 pcs Floodlight accessory
7 Rubber Straps / 8 pcs Floodlight accessory
8
9
10
Note: Floodlight and fiber optic communication link are optional; ignore related content if not selected.
Frequently Asked Questions
Q1: Can I touch the tether cable after HV is energized?
No. The operating manual clearly states that no operation on the tether system is required during the entire flight. The cable carries high voltage; although insulated and rated for 3500VDC, in wet conditions or with wear/damage, there is a risk of high‑voltage exposure.
Q2: Can I turn on the tether box HV before starting the drone?
No. The drone performs a self‑check at startup and requires battery power and data communication. Energizing HV first only supplies power but no battery data, which may cause self‑check errors. Correct sequence: Start remote controller → Start drone, wait for self‑check → Apply AC to tether box → Enable HV → Take off.
Q3: Do I need to constantly monitor the tether box display during flight?
No. The operator should focus on the drone mission. Just keep an eye on the voltage reading on the remote controller screen; as long as it stays above 25V, the system is supplying power normally. If voltage drops below 25V or an alarm sounds, land the drone first and then investigate.
Q4: The tether box display voltage fluctuates significantly and won't stabilize – what to do?
Land the drone and check battery level or external power supply. Possible causes: a) Drone battery low – the tether supply must power the drone, payload, and charge the battery simultaneously, triggering overload protection; b) External power supply insufficient – causing input undervoltage protection.
Q5: The remote controller shows "Battery contact error – return to land" or "Battery power insufficient" – what should I do?
This is normal and can be ignored. Since both drone and payload are powered by the tether system, the drone detects no battery output during flight. Ensure the battery latches are secure, and no action is required.
Q6: The remote shows "Strong wind – fly with caution" even in calm conditions – how to handle?
If there is no wind or only light wind, check whether the drone is overloaded or the cable tension is set too high.
Q7: If the actual operating height is much lower than the cable length (e.g., 110m cable but only 30m height), do I need to pull out all the cable first?
No. You can periodically (about every 1 hour) ascend to a higher altitude to let the cable passively extend for cooling, hover for ~1 minute, then return to the working height.
Q8: Why can't I turn on the floodlight when the drone is on the ground?
The floodlight has no active cooling and relies on propeller airflow for heat dissipation. The firmware prevents the light from turning on below a certain altitude and automatically turns it off after landing. Therefore, it cannot be switched on while the drone is on the ground.
You May Also Like
G70-M400 Tethered Power Station
Popular

G70-M400 Tethered Power Station

For Matrice 400, rated 7000W, supports 200m height, high‑power output, intelligent retraction, safe and reliable.
Height 200m 7000W
View Details
G35-M400 Tethered Power Station
Upgrade

G35-M400 Tethered Power Station

For DJI M400 series, rated 3500W, supports 100m height, lightweight, intelligent retraction, ideal for mobile inspection.
M400 compatible 3500W
View Details
G12-M4 Tethered Power Station
Compact

G12-M4 Tethered Power Station

For DJI M4 series, rated 1200W, supports 50m height, ultra‑light design, quick deployment for short‑duration missions.
Height 50m 1200W
View Details

FAQ

1. COME POSSO EFFETTUARE IL MIO ORDINE?

  • Scegli semplicemente il tuo stile nella pagina del prodotto, quindi clicca sul pulsante "Aggiungi al carrello" e segui i semplici passaggi per completare il tuo ordine.
  • Ti prepareremo l'ordine e ti faremo sapere quando sarà in arrivo!

2. QUANTO TEMPO CI VORRÀ PER SPEDIRE IL MIO ORDINE?

  • Gli ordini vengono solitamente spediti entro 5-10 giorni lavorativi. Per gli ordini internazionali, il transito richiederà ulteriori 1-2 settimane.

3. IL MIO NUMERO DI TRACCIAMENTO NON FUNZIONA

  • I numeri di tracciamento possono impiegare da 3 a 5 giorni per comparire nel sistema del corriere. Occasionalmente, il corriere può smarrire un ordine. Se il numero di tracciamento non funziona ancora dopo qualche giorno, si prega di contattare il corriere.

4. HO BISOGNO DI AIUTO CON UN ORDINE IN RITARDO

  • Gli ordini vengono generalmente spediti entro 5-8 giorni lavorativi. Per gli ordini internazionali, il transito richiederà ulteriori 1-2 settimane.
  • Se il tuo ordine non è arrivato dopo 10 giorni lavorativi (nazionale) e 20 giorni lavorativi (internazionale), ti preghiamo di contattare il nostro team, saremo felici di aiutarti.
  • Prodotti che necessitano di personalizzazione, il tempo di produzione è di 10-25 giorni per la spedizione, i dettagli del prodotto saranno comunicati.

5. Accettiamo i seguenti metodi di pagamento sicuri:

Carte di Credito (tramite Airwallex):

  • Visa / Mastercard / American Express
  • Protetto daAirwallex, una piattaforma di pagamento conforme a livello globale

Pagamenti di Terze Parti:

  • PayPal (Conti Personali e Aziendali)

Bonifico Bancario:

  • Trasferimento di Conto Aziendale (Supporto SWIFT/IBAN)

6. QUANDO VERRÀ ADDEBITATA LA MIA CARTA?

Subito dopo che il tuo ordine è stato effettuato con successo.

7. QUANTO È SICURA LA MIA INFORMAZIONE PERSONALE?

  • Ci atteniamo ai più alti standard del settore per proteggere le tue informazioni personali durante il pagamento e l'acquisto.
  • La tua carta di credito viene crittografata durante la trasmissione utilizzando la tecnologia Secure Socket Layer (SSL), ampiamente utilizzata su Internet per l'elaborazione dei pagamenti. Le informazioni della tua carta di credito vengono utilizzate solo per completare la transazione richiesta e non vengono successivamente memorizzate.

7. Sicurezza negli acquisti garantita

Utilizziamo PAYPAL per raccogliere i pagamenti. Per maggiori dettagli, puoi consultare il sito ufficiale di PAYPAL per garantire i fondi del tuo acquisto.

https://www.paypal.com/webapps...

8.Quale consegna?

Collaboriamo con le compagnie di spedizione DHL, FedEx, EMS, puoi scegliere liberamente al momento dell'ordine;

9. Problema di rimborso?

A causa di motivi imputabili all'acquirente, si è reso necessario un rimborso. Questo sito web non sarà responsabile del pagamento delle spese di gestione. Le spese di spedizione non sono addebitate per i prodotti restituiti.

10、Risposta: La responsabilità dello sdoganamento dipende dai termini commerciali (ad esempio, EXW, FOB, DDP). Generalmente:

  • I nostri Termini PredefinitiIl cliente (destinatario) deve occuparsi dello sdoganamento e pagare tutte le tasse/dazi.
  • Eccezioni: Se il tuo ordine indica "DDP (Delivered Duty Paid)", ci occuperemo dello sdoganamento.

11、Risposta: Documenti generalmente richiesti:

  • ID (ad es., passaporto) o numero di partita IVA;
  • Fattura commerciale (contattaci dopo l'acquisto);
  • ConsiglioContatta in anticipo la tua dogana locale!

12、Risposta: I dazi sono determinati dalla dogana del tuo paese in base al tipo di prodotto, al valore e alle normative. Per stimare i costi:

  • Controlla il sito web delle dogane locali;
  • Utilizza strumenti di terze parti (ad esempio, Avalara, DutyCalculator).

13、Risposta:

  • RitardiContattare direttamente la dogana per inviare documenti/pagamenti. Possiamo fornire numeri di tracciamento o fatture.
  • Distruzione: Le perdite dovute a una mancata risposta per lo sdoganamento saranno a carico del cliente.
  • EccezioniSe causato da errori nella nostra documentazione, contattaci per assistenza.

14、Risposta: Riceverai una fattura commerciale e una lista di imballaggio via email. Per altri documenti, contattasales@uavmodel.com(response entro 24 ore).

15、RispostaI seguenti prodotti possono essere sequestrati o respinti:

  • Articoli proibiti nel tuo paese (ad esempio, cosmetici con ingredienti vietati);
  • Prodotti senza le certificazioni richieste (ad esempio, elettronica priva del marchio CE);
  • Valore sottostimato (potrebbe sollevare sospetti di evasione fiscale).

Se paghi con carta di credito, il tuo pagamento potrebbe essere in qualche modo rifiutato al checkout dal nostro sistema in difesa contro possibili frodi con carta di credito. È una buona idea contattare in anticipo la tua compagnia di carte di credito o la tua banca per informarli dell'acquisto, in modo che non venga rifiutato.
In tali circostanze, ecco 3 soluzioni per te:
1. Se hai un account PayPal, ti preghiamo di provare a pagare tramite PayPal.
2. Si prega di passare alle altre carte di credito/debito.
3. Se non hai un account PayPal, seleziona comunque PayPal nella pagina di checkout e clicca sul pulsante per completare l'ordine. Sarai quindi reindirizzato a una pagina con accesso sia a PayPal che al pagamento con carta di debito/credito (per quest'ultima opzione, non è necessario registrarsi per PayPal).
Come segue:


Passo 1. Seleziona PayPal (anche se non hai un account PayPal)


Passo 2. Clicca su "Paga con Carta di Debito o Credito".


Passo 3. Compila le informazioni della tua carta di credito e completa il tuo ordine.

Informazioni sul bonifico bancario:

Numero di conto: 63001185921
Nome del titolare: Xiamen Gaoteng Trading Co., Ltd.
Valuta di supporto: AUD CAD CHF DKK EUR GBP HKD JPY NOK NZD SEK SGD USD ZAR
Nome della Banca: JPMorgan Chase Bank N.A. Filiale di Hong Kong
Posizione della Banca Paese: HONG KONG, CINA
Indirizzo della Banca: CHATER HOUSE, 8 CONNAUGHT ROAD, CENTRAL, HONG KONG
Tipo di conto: Corrente
Swift/BIC: CHASHKHH (CHASHKHHXXX, se sono richiesti 11 caratteri)
Numero di routing: 007863
Codice Bancario: 007
Numero di filiale: 863
Si prega di includere il seguente promemoria/messaggio al destinatario quando si effettua un pagamento: [Buyer Name][Invoice/Contract Number][Product]

UAVMODEL

Proprietà:

UAVMODEL CO., LTD.; 

ZHANGZHOU YICHENG TECHNOLOGY CO., LTD.;

XIAMEN GAOTENG TECHNOLOGY CO., LTD.

Email:Sales@uavmodel.com

Telefono: +8613015671328

313, No.25, Jingxia Road, Wenpu Industrial Park, Jiaomei Town, Taiwan Investment Zone,

Unità 2502-3, No.1110, Jimei North Road, Software Park, Torch High-tech Zone, Xiamen

产品图片1 产品图片2

Cosa facciamo realmente?

UAVMODEL è un produttore leader di fusoliere UAV. Le nostre piattaforme UAV soddisfano esigenze professionali in ispezione industriale, gas e petrolio, agricoltura di precisione, mappatura, sicurezza pubblica, costruzione, silvicoltura e difesa.

Oltre 10 anni di esperienza

500+ Casi di Successo

12+ Premi del Settore

La nostra Visione

Siamo impegnati nella R&S di UAV di medie e grandi dimensioni e tecnologie UAV specializzate per ambienti complessi. Il nostro focus include progettazione, produzione, collaudo, vendita e assistenza, offrendo soluzioni complete basate sulla nostra tecnologia.

愿景图片1 愿景图片2

La soddisfazione del cliente al 100% è la nostra priorità

Utilizzando Soluzioni Digitali Complesse e Affidabili

Alti Standard di Assistenza Clienti

Lavorare con i principali esperti di mercato

Collabora con noi!

Servizio clienti professionale e cordiale.
Spedizione gratuita o a prezzi accessibili.
Opzioni di pagamento multiple: PayPal, Carta di Credito e Bonifico Bancario.
UAVMODEL è accettabile.
Spedizione veloce e affidabile con corretta dichiarazione del prodotto.

运输图片

Supporto 24/7

Assistenza e competenza tecnica attiva 24 ore su 24, 7 giorni su 7
Parla con i nostri ingegneri per risposte e consigli
Portale Clienti per Richieste di Supporto e Gestione Account


© 2025 UAVMODEL. Tutti i diritti riservati.

Spedizione gratuita

Alcuni paesi oltre $100

Resi gratuiti

Nessuna domanda fatta

TrustScore 4.9

Più di 1000

130-1567-1328

sales@uavmodel.com