UAVMODEL
SF-91X-100M 이중 계류수 분무 시스템
결제 후 30~40일 이내 배송 예정;
Checkout Securely with
주문이 불가능한 고객님께서는 저희에게 연락해 주시기 바랍니다;
SF-91X-100M 이중 테더형 물 분사 시스템은 주로 커튼월 청소 및 분사를 위해 설계되었습니다. "스파이더맨" 드론을 대체하며 도시 고층 건물, 발전소, 화학 공장의 외관 유지보수 효율성과 안전성을 향상시킵니다. 이 혁신적인 테더링 시스템은 기존 물 분사 시스템의 비행 지속 시간을 크게 개선하여 드론의 단기 전원 공급 문제를 해소합니다. 이는 무제한 비행 시간의 마지막 100미터 문제를 효과적으로 해결하여 광범위한 배치를 가능하게 합니다. 당사는 50미터에서 300미터 높이, 12kW에서 60kW 전력 범위의 모든 물 테더링 플랫폼에 적합한 전기 테더링 시스템을 제공하여 까다로운 고객의 요구를 충족합니다.
I. 제품 사양
1. AF-J30 테더형 드론

| 제품 재질 | 탄소 섬유 + 항공기용 알루미늄 합금 |
| 로터 수 | 6개 로터 |
| 휠베이스 | ≤1840mm |
| 전개 크기 | 2780*2780*820mm |
| 접은 크기 | 820*940*880mm |
| 무게(배터리 제외) | ≤20kg |
| 최대 적재량 | ≤30kg |
| 최대 이륙 중량 | ≤65kg |
| 위치 측정 시스템 | RTK (4G 버전) |
| 전원 배터리 | 14S 고밀도 배터리 |
| 원격 제어 | 7인치 디스플레이, 원격 제어 및 영상 전송 통합 |
| 안전 풍속 | ≤6등급 |
| 작동 온도 | -20°C ~ 50°C |
| 장애물 회피 | 전방 장애물 회피 (기타 방향 선택 가능) |
2. WF-12K 테더형 공중 전원 공급기

| 항목 | 사양 |
| 모델 | WF-1000S60-12K |
| 입력 전압 | 800-1000VDC |
| 출력 | 59VDC/200A |
| 전력 | 12KW |
| 무게 | 3.21±0.5kg |
| 크기 | 277*202*70mm |
| 입력 단자 | XT60 |
| 출력 단자 | XT150 |
3. AF-G30 테더형 지상 전원 공급 박스

| 항목 케이블 길이 | 사양: 120m |
| 입력 전압 | 380VAC |
| 출력 전압 | 1000VDC |
| 전력 | 16kW |
| 케이블 인장 강도 | 50kg |
| 감김 시스템 | 자동 |
| 크기 | 500*480*460mm (길이, 너비, 높이) |
| 무게 | 41.5±1kg (케이블 포함) |
4. 지상 압력식 물 분사 탱크

| 항목 | 사양 |
| 케이스 크기 | 72*62*100cm |
| 입력 전압 | 380VAC |
| 작동 전력 | 7.5KW |
| 시동 방식 | 수동/자동 |
| 내부 물탱크 용량 | 70L |
| 물 사용 방식 | 내장 싱크대/수도 연결 가능, 탄소 섬유 호스가 드론 끝 노즐에 연결됨 |
| 펌프 노즐 압력 | 12MPA (조절 가능) |
| 분사 거리 | 10m 이상 |
| 물 호스 길이 | 100m |
- 테더형 장치는 비 오는 날 비행에 적합하지 않습니다. 케이블이 비에 노출되면 전기 전도 및 메인보드 손상이 발생할 수 있습니다. 모든 결과는 사용자 책임입니다.
2. 온보드 전원 과부하 또는 부적절한 사용으로 인한 메인보드 손상은 보증 대상이 아닙니다.
3. 이 장치를 직사광선 아래에서 작동하지 마십시오. 제어판이 열을 흡수하여 케이블의 열 방출을 방해하고 케이블 손상을 초래할 수 있습니다. 이 또한 보증 대상이 아닙니다.
4. 이 장치의 외부 박스는 일반적으로 두 사람이 운반합니다. 운송 중 충격 흡수를 위해 에어 박스에 넣어야 합니다.II. 작동 절차
1. 먼저 드론을 꺼내고 프로펠러 가드를 제거한 후 모든 프로펠러를 펼치고 클립을 고정합니다.2. 붐을 꺼내 완전히 펼친 후 회전시켜 고정합니다. 붐의 퀵 릴리스 탭을 드론 배면 슬롯에 삽입합니다. 양쪽 클립을 조입니다. 붐 연결부 중앙에 전기 테이프를 한 겹 감아 미끄러짐을 방지합니다. 점검합니다.
3. 배터리를 장착합니다. 배터리 칸에 넣고 벨크로로 고정하여 움직이지 않도록 합니다. 원격 제어기를 켜고 배터리 입력 케이블을 기체에 연결합니다. 삐 소리가 납니다. 원격 제어기와 기체가 연결 성공을 표시하고 드론의 녹색 불빛이 깜박입니다. 드론이 위성을 탐색할 때까지 기다립니다. 완료되면 이륙합니다. 정식 작업 전, 빈 상태로 이륙하여 기체 상태와 기능을 점검합니다. 지상 2미터 이상에서 착륙합니다(이 과정은 30초 이내). 착륙 직후 배터리 전원 케이블을 분리합니다.
4. 테더 박스에서 고전압 출력 케이블을 꺼내 하중 지점 후크를 고정합니다. 케이블을 온보드 모듈(XT60 커넥터)에 연결합니다. 테더 박스 전원 케이블을 연결합니다. "4핀 플러그" 정렬에 주의합니다. 정렬 후 삽입하고 시계 방향으로 조여 고정합니다. 딸깍 소리가 나면 고정된 것입니다. 느슨함이 없는지 확인합니다. 다른 쪽 끝을 전원 공급 장치에 연결합니다. 전원 공급 박스 또는 발전기일 수 있습니다. 3상 4선식 시스템을 사용합니다. 전선과 중성선(N)이 분리되어 있는지 확인합니다. 느슨한 연결과 스파크 방지를 위해 단단히 조입니다. 전원 공급이 안정적이고 충분한지 확인합니다. (발전기인 경우 연료 충분 여부 확인)
5. 물 펌프 전원 케이블을 전원 공급 장치에 연결합니다. 전원 공급 박스 또는 발전기일 수 있습니다. 3상 4선식 시스템을 사용합니다. 전선과 중성선(N)이 분리되어 있는지 확인합니다. 느슨한 연결과 스파크 방지를 위해 단단히 조입니다. 전원 공급이 안정적이고 충분한지 확인합니다. (발전기인 경우 연료 충분 여부 확인) 물탱크를 채우되 경고선을 넘지 않도록 주의합니다. 사용 전 모든 호스를 분리하고 정리하여 엉키지 않도록 합니다. (실제 작업 중에는 호스와 계류 케이블이 나무에 엉키지 않도록 주의) 호스 한쪽 끝을 물 펌프에, 다른 쪽 끝을 붐에 연결하고 느슨함이 없는지 점검합니다. 모든 커넥터는 빠른 분리를 위해 설계되었습니다. [운송 중 물 펌프를 뒤집거나 옆으로 두지 마십시오. 오일 누출 및 장비 손상이 발생할 수 있습니다.]
6. 배터리 입력 케이블을 기체에 다시 연결합니다. 삐 소리가 납니다. 원격 제어기가 기체 연결 성공을 표시하고 드론이 녹색 불빛을 깜박입니다. 드론이 위성을 스캔할 때까지 기다린 후 이륙 준비를 합니다.
7. 먼저 물 펌프 발전기를 켜 펌프가 정상 작동하는지 테스트합니다. 물 펌프 원격 제어가 수량 조절이 가능한지 확인합니다. 원격 제어기를 켜고 꺼서 정상 작동 여부를 확인합니다.
8. 계류 박스 발전기를 켜고 주 전원 스위치를 끕니다. 릴 토크를 왼쪽(반시계 방향)으로 최소로 조절합니다. 모든 준비가 완료되면 이륙 준비를 합니다.
9. 기체에서 이륙합니다(기체 주변이 안전하고 보행자 및 나무가 없는지 확인). 지상 3~5미터 높이에서 계류 박스의 "주 전원 스위치"를 눌러 고전압 전원을 켭니다. DC 출력은 1000V이며, 전력 및 전압 파라미터가 지상 계류 박스 디스플레이에 표시됩니다. 노브를 적절한 위치로 조절하고 케이블을 약간 팽팽하게 유지합니다. 계류 박스 고전압 전원 공급 중 케이블은 1000V 고전압을 운반하므로 절대 손으로 직접 만지지 마십시오. 만져야 할 경우 전문 절연 장갑을 착용하십시오. 더운 날씨에는 모든 덮개를 열어 열을 방출합니다. 20~30미터만 장시간 비행할 경우 내부 열로 인한 손상을 방지하기 위해 미리 모든 케이블을 정리해 제거합니다.
10. 기체가 비행 중일 때 물 펌프 제어 스위치를 켭니다. 물 펌프 노브를 천천히 적절한 눈금으로 조절합니다(압력 증가 시 시계 방향, 압력 감소 시 반시계 방향). 건설 표면에 천천히 접근하여 작업을 시작합니다. 작업 중 항상 안전을 확보하고 벽에 너무 가까이 가지 않도록 주의합니다. 물 펌프 하우징에 충분한 물이 있는지 확인합니다.
11. 기체 착륙 전 물 펌프를 끕니다. 테더 박스 릴 노브의 토크를 적절히 조절하여 케이블을 약간 팽팽하게 유지합니다. 그런 다음 천천히 하강하며 기체 자세에 주의합니다. 조종사를 제외한 모든 사람은 착륙 지점에서 떨어져 있어야 합니다. 기체가 지상 약 3미터 높이일 때 테더 박스의 "주 전원 스위치"를 끄고 릴 노브를 반시계 방향으로 최소 토크로 조절합니다.
12. 착륙 후 먼저 배터리 전원 케이블을 분리합니다. 그 다음 테더 전원 케이블을 분리하고 케이블을 감습니다. 토크를 직접 조절하거나 손 크랭크 렌치를 사용해 케이블을 감을 수 있습니다. 케이블을 감을 때는 케이블이 꺾이지 않도록 주의하십시오. 내부 케이블 손상이 쉽게 발생할 수 있습니다. 감은 후 측면 캡을 교체합니다.
13. 물 펌프 사용 후 펌프 내 남은 모든 액체를 배출합니다(렌치를 사용해 노브를 열어 물을 배출). 수건으로 건조시키고 정기 점검을 실시합니다.
14. 작은 릴을 사용해 물 파이프를 회수하고 물을 배출합니다. 파이프 연결부를 급격히 구부리지 않도록 주의합니다. 운송 중 파이프가 눌리거나 날카로운 물체에 찔려 파열되지 않도록 주의합니다.
15. 드론 프로펠러를 접고 보호 커버로 고정한 후 비행 케이스에 넣습니다.
16. 테더 제트 시스템 작동 완료 후 케이블을 감을 때 케이블이 건조한지 확인합니다. 케이블이 젖어 있으면 건조 후 감으십시오. 케이블이 손상되면 즉시 작동을 중단하고 제조사에 점검 또는 수리를 의뢰하십시오. 전기 스파크를 방지합니다. 작동 중 케이블을 다룰 때는 절연 장갑을 착용하십시오.
FAQS
1. HOW DO I PLACE MY ORDER?
- Simply choose your style on the product page then click the “Add To Cart” button and follow the simple steps to complete your order.
- We’ll prepare your order and let you know when it's on its way!
2. HOW LONG WILL IT TAKE TO SHIP MY ORDER?
- Orders typically ship within 5 to 10 business days. For international orders, transit will take an additional 1 to 2 weeks.
3. MY TRACKING NUMBER ISN’T WORKING
- Tracking numbers can take 3-5 days to appear in the shipping carrier's system. Occasionally, the shipping carrier can lose an order. If the tracking number is still not working within a few days, please contact the shipping carrier.
4. I NEED HELP WITH A LATE ORDER
- Orders typically ship within 5 to 8 business days. For international orders, transit will take an additional 1 to 2 weeks.
- If your order has not arrived after 10 business days (domestic) and 20 business days (international), please contact our team, we are happy to assist.
- Products that need to be customized, production time is 10-25 days to ship, product details will be announced.
5. We accept the following secure payment methods:
Credit Cards (via Airwallex):
- Visa / Mastercard / American Express
- Secured by Airwallex, a global compliant payment platform
Third-Party Payments:
- PayPal (Personal & Business Accounts)
Bank Transfer:
- Corporate Account Transfer (SWIFT/IBAN Supported)
6. WHEN WILL MY CARD BE CHARGED?
Just after your order has been successfully placed.
7. HOW SECURE IS MY PERSONAL INFORMATION?
- We adhere to the highest industry standards to protect your personal information when you checkout and purchase.
- Your credit card information is encrypted during transmission using secure socket layer (SSL) technology, which is widely used on the Internet for processing payments. Your credit card information is only used to complete the requested transaction and is not subsequently stored.
7.Shopping safety guaranteed
We use PAYPAL to collect payment. For details, you can check the official website of PAYPAL to guarantee your shopping funds.
https://www.paypal.com/webapps...
8.What delivery?
We cooperate with DHL, FedEx, EMS shipping companies, you can choose freely when placing orders;
- DHL : https://www.dhl.com/
- FedEx :https://www.fedex.com/
- EMS:https://www.ems.com.cn/
- Logistics Tracking:https://www.uavmodel.com/apps/17TRACK
9.Refund issue?
Due to the buyer's own reasons, resulting in a refund. This website will not be responsible for the payment of processing fees including returning shipping cost.
Made-to-order products: Once a customer submits an order, the product will immediately go into production. Given its customized nature and the immediacy of production, such orders become binding upon confirmation and no refunds will be accepted.
All products that require production time are classified as customized products.
10、Answer: Customs clearance responsibility depends on trade terms (e.g., EXW, FOB, DDP). Generally:
- Our Default Terms: The customer (consignee) must handle clearance and pay all duties/taxes.
- Exceptions: If your order states "DDP (Delivered Duty Paid)", we will handle clearance.
11、Answer: Typically required documents:
- ID (e.g., passport) or business tax number;
- Commercial invoice (contact us after purchase);
- Tip: Contact your local customs in advance!
12、Answer: Duties are determined by your country’s customs based on product type, value, and regulations. To estimate costs:
- Check your local customs website;
- Use third-party tools (e.g., Avalara, DutyCalculator).
13、Answer:
- Delays: Contact customs directly to submit documents/payments. We can provide tracking numbers or invoices.
- Destruction: Losses due to unresponsive clearance will be borne by the customer.
- Exceptions: If caused by our documentation errors, contact us for support.
14、Answer: You will receive a commercial invoice and packing list via email. For other documents, contact sales@uavmodel.com (response within 24 hours).
15、Answer: The following products may be seized or rejected:
- Prohibited items in your country (e.g., cosmetics with banned ingredients);
- Products without required certifications (e.g., electronics lacking CE marks);
- Under-declared value (may raise tax evasion suspicions).
If you pay by credit card, your payment could be somehow denied at the checkout by our system in defense against possible credit card fraud. It's a good idea to call your credit card company or bank ahead of time to let them know about the purchase so that it doesn't get declined.
Under such circumstance, here are 3 solutions for you:
1. If you have a PayPal account, please try to pay by PayPal.
2. Please switch to your other credit/debit cards.
3. If you do not have a PayPal account, please select PayPal still at the checkout page & click the complete order button. Then you'll be directed to a page with access to both PayPal and Debit/Credit card payment (for the latter option, you don't have to register for PayPal).
As following steps:
Step 1. Select PayPal (even if you don't have a PayPal account)

Step 2. Click on "Pay with Debit or Credit Card".

Step 3. Fill in your credit card info and complete your order.

Bank transfer information:
Account Number: 63001185921
Holder Name: Xiamen Gaoteng Trading Co., Ltd.
Support Currency: AUD CAD CHF DKK EUR GBP HKD JPY NOK NZD SEK SGD USD ZAR
Bank Name: JPMorgan Chase Bank N.A. Hong Kong Branch
Bank Location Country: HONG KONG, CHINA
Bank Address: CHATER HOUSE, 8 CONNAUGHT ROAD, CENTRAL, HONG KONG
Account Type: Current
Swift/BIC: CHASHKHH (CHASHKHHXXX,If 11 characters are required)
Routing Number: 007863
Bank Code: 007
Branch Number: 863
Please include the following memo/message to receiver when making a payment: [Buyer Name][Invoice/Contract Number][Product]
UAVMODEL
Ownership:
UAVMODEL CO., LTD.;
ZHANGZHOU YICHENG TECHNOLOGY CO., LTD.;
XIAMEN GAOTENG TECHNOLOGY CO., LTD.
Email:Sales@uavmodel.com
Phone: +8613015671328
313, No.25, Jingxia Road, Wenpu Industrial Park, Jiaomei Town, Taiwan Investment Zone,
Unit 2502-3, No.1110, Jimei North Road, Software Park, Torch High-tech Zone, Xiamen

What we really do?
UAVMODEL is a leading UAV airframe manufacturer. Our UAV platforms serve professional needs in industrial inspection, gas and oil, precision agriculture, mapping, public safety, construction, forestry and defense.
10+ Years of Experience
500+ Successful Cases
12+ Industry Awards
Our Vision
We are committed to the R&D of medium and large UAVs and specialized UAV technologies for complex environments. Our focus includes design, production, testing, sales, and service, providing comprehensive solutions based on our technology.
100% Client Satisfaction is Our Priority
Using Complex & Reliable Digital Solutions
High Customer Support Standards
Working with Leading Market Experts
Cooperate with Us!
Professional and friendly customer service.
Free or affordable shipping.
Multiple payment options: PayPal, Credit Card and Bank Transfer.
UAVMODEL is acceptable.
Fast and reliable shipping with proper product declaration.

Support 24/7
24/7 Live Technical Expertise and Support
Speak with our Engineers for Answers and Advice
Customer Portal for Support Requests and Account Management
최신 뉴스
MAD FLUXER Pro 32 x 9.6 Inch Matt Carbon Fiber Propeller
MAD FLUXER Pro 32 x 9.6 Inch Matt Carbon Fiber Propeller The MAD FLUXER Pro 32 x 9.6 inch Matt Carbon Fiber Propeller is a premium high-performance propeller designed for...
MAD M90C60 EEE — 45 kW Manned Drone Motor for Heavy-Lift & eVTOL Applications
MAD M90C60 EEE — 45 kW Manned Drone Motor for Heavy-Lift & eVTOL Applications Overview: The MAD M90C60 EEE is an industrial-grade, high-power brushless motor engineered for heavy-lift multicopters, cargo...
Skyeye UAV Series — Reinforced Support Landing Gear Upgrade
Skyeye UAV Series — Reinforced Support Landing Gear Upgrade Release: Skyeye series landing gear upgrade - stronger, more stable, and built for industrial field use. Introduction At UAVMODEL, we continually...
PixSurvey A2 Aerial Survey Autopilot Kit
PixSurvey A2 Aerial Survey Autopilot Kit: Revolutionizing UAV Surveying for Professionals Introduction to the PixSurvey A2 Autopilot Kit In the world of unmanned aerial systems (UAS), the need for precise,...
